Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (547)

Country

Austria (89)
Belgium (138)
Denmark (6)
Finland (73)
France (279)
Germany (457)
Greece (16)
Italy (235)
Luxembourg (47)
Netherlands (69)
Norway (1)
Portugal (26)
Spain (194)
Sweden (133)
Switzerland (2)
United Kingdom (196)

Advanced search

Search projects and results

Results 1 - 10 of 547
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: 7210-PR/377
Start date: 2002-07-01, End date: 2005-06-30
This proposal has a commercial and a technical objective. The commercial objective is to increase the use of cold-formed steel components in the light gauge steel framed buildings, especially in the earthquake zones. The technical objective is to develop guidance for codified ...
Programme: ECSC-STEEL C
Record Number: 66636
Last updated on: 2002-12-13
ID: 7215-PP/039
Start date: 1999-07-01, End date: 2002-06-30
The aim of this research proposal is to diagnose on-line the possible causes of failures of thickness quality in the products manufactured in hot strip mills. This proposal is oriented towards the installation, completion and improvement of a laboratory prototype developed und...
Programme: ECSC-STEEL C
Record Number: 66969
Last updated on: 2002-12-13
ID: 7215-PP/042
Start date: 1999-07-01, End date: 2000-06-30
A complete new Fire Safe Concept has been developed in the ECSC project 7210- SA/522. The aim of this project completed in June 1998, was to achieve a breakthrough in the natural fire safety concept thus leading to safer and more economical steel buildings. This concept based ...
Programme: ECSC-STEEL C
Record Number: 66972
Last updated on: 2002-12-13
ID: 7215-PP/031
Start date: 1999-07-01, End date: 2002-06-30
The "Ferritic Rolling" practice is very well suited for processing different products. The production of low cost CQ grades from low C steel is already under control. However, it appears clearly, from laboratory scale simulation, that a very efficient lubrication in the HSM is...
Programme: ECSC-STEEL C
Record Number: 66961
Last updated on: 2002-12-13
ID: 7215-PP/030
Start date: 1999-07-01, End date: 2001-06-30
The aim of this project is to design, build and test, in the normal operating conditions of the hot strip mill, a new short cooling equipment placed between the roughing and the finishing mill, in order to cool, in a very fast and controllable way, the bar coming out of the ro...
Programme: ECSC-STEEL C
Record Number: 66960
Last updated on: 2002-12-13
ID: 7215-PP/021
Start date: 1998-07-01, End date: 2001-06-30
The aim of this Pilot and Demonstration project is to develop an on-line inspection system for automatic full width work roll observation with an integrated image analysing system, based on a prototype CCD camera inspection system already developed in a previous ECSC project. ...
Programme: ECSC-STEEL C
Record Number: 66951
Last updated on: 2002-12-13
ID: 7215-PP/018
Start date: 1998-07-01, End date: 2000-06-30
The present proposal is phase II of a currently running Pilot and Demonstration project. It is focused on the application of ultra fast cooling to thin strip. The work programme of the project includes the design, building and testing in the normal operating conditions of the ...
Programme: ECSC-STEEL C
Record Number: 66948
Last updated on: 2002-12-13
ID: 7215-PP/017
Start date: 1998-07-01, End date: 2001-06-30
The present project aims at producing steel sheets with exclusive properties by carburizing IF strips during continuous annealing. Carbon will be introduced in the strip when the texture is fixed, in order to combine deep drawing quality and improved mechanical properties. In ...
Programme: ECSC-STEEL C
Record Number: 66947
Last updated on: 2002-12-13
ID: 7215-PP/002
Start date: 1997-07-01, End date: 2000-12-31
Blast furnace tuyere injection of materials into the raceway is able to accommodate the co-injection of a wide range of oily, wet and dry by-products. However, some by-products have physical properties, which result in handling problems for blast furnace operation. This projec...
Programme: ECSC-STEEL C
Record Number: 66944
Last updated on: 2002-12-13
ID: 7215-CA/204
Start date: 1996-07-01, End date: 1998-06-30
The aim of this project is to design, build and test novel cooling equipment based on recent research work, to be installed immediately behind the last stand of a hot strip mill to provide very fast and controllable cooling of the exiting strip. Optimized cooling patterns will...
Programme: ECSC-STEEL C
Record Number: 66939
Last updated on: 2002-12-13
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-01-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top