Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (114)
Report Summary (3)

Country

Belgium (4)
France (35)
Germany (29)
Italy (10)
Luxembourg (3)
Netherlands (2)
Spain (10)
United Kingdom (22)

Advanced search

Search projects and results

Results 1 - 10 of 117
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
A self-monitoring carbon monoxide filter unit was developed to increase safety for employees who work in atmospheres containing carbon monoxide near blast furnaces and other metallurgical facilities. This was accomplished by integrating an electro-chemical sensor between the f...
Programme: ECSC-WORKSAFE C
Record Number: 20542
Last updated on: 1998-07-08
ID: 7262-23/218/01
Start date: 1990-01-01, End date: 1994-12-31
The aim of these studies was to permit evaluation of rope behaviour in realistic conditions on crane installations and hence improve safety at crane workplaces in the steel industry.
Programme: ECSC-WORKSAFE C
Record Number: 29565
Last updated on: 1995-11-17
ID: 7262-25/213/01
Start date: 1990-01-01, End date: 1994-06-30
To carry out full-scale tests on the TU Berlin test beds and comparative practical tests at Thyssen Stahl company.
Programme: ECSC-WORKSAFE C
Record Number: 29560
Last updated on: 1995-11-17
ID: 7262-01/266/01
Start date: 1992-01-01, End date: 1995-12-01
Existing CO filter systems offer only secondary parameters for assessing when they need replacing. Such parameters include increased resistance through the drying agent or the so-called odour warning (release of an odorant when moisture penetrates into the warning layer). T...
Programme: ECSC-WORKSAFE C
Record Number: 29646
Last updated on: 1995-11-17
The main activities were as follows: analysis of working conditions and identification of harmful and dangerous factors; detailed environmental survey and drawing up of a risk chart; identification of the primary and secondary sources of noise; installation of automatic markin...
Programme: ECSC-WORKSAFE C
Record Number: 20541
Last updated on: 1998-07-08
ID: 7262-24/203/04
Start date: 1990-01-01, End date: 1991-12-31
The purpose of the project is to investigate the interrelationship of current innovations, improvement in environmental factors and reduction in the exposure to risk of workers employed in the plate finishing shop. These persons generally work outside the control pulpits and ...
Programme: ECSC-WORKSAFE C
Record Number: 29550
Last updated on: 1995-11-17
ID: 7262-03/275/01
Start date: 1992-10-01, End date: 1995-10-01
The aim of the research project is to improve conventional protection and monitoring equipment for electrical power cables in underground hard coal mines so that - cable damage and faults can be detected and located as quickly as possible and - mixtures of gas and air and coa...
Programme: ECSC-WORKSAFE C
Record Number: 29654
Last updated on: 1995-11-17
Existing line protection shows deficiences in safety when operating in the presence of explosive methane and air mixtures and coal dust. Two alternative selective monitoring systems have been tested which monitor directly the three conductors of a power cable and which detect ...
Programme: ECSC-WORKSAFE C
Record Number: 19375
Last updated on: 1997-11-11
ID: 7262-03/313/01
Start date: 1993-12-01, End date: 1994-12-01
In the mining countries of the European Community different methods are still prescribed for flammability testing of conveyor belts. With the completion of the Internal Market and the associated requirement for dismantling of barriers to trade, these methods are to be harmonis...
Programme: ECSC-WORKSAFE C
Record Number: 29609
Last updated on: 1995-11-17
ID: 7262-02/303/03
Start date: 1993-06-01, End date: 1996-05-31
The somewhat confused situation regarding knowledge of the risks encountered by workers exposed to iron compound-based dusts is particularly detrimental to the steel industry. In the long term, an effective prevention policy depends on a deeper understanding of the causes of...
Programme: ECSC-WORKSAFE C
Record Number: 29600
Last updated on: 1995-11-17
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-01-20
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top