Community Research and Development Information Service - CORDIS

Results 1 - 10 of 60
Order by: Results/page:
12 3 4 5 6 > 
Acoustic and thermal instrumentation, tests and modelling of engine surface coolers in representative aerodynamic conditions
ID: 255881
Start date: 2010-01-01, End date: 2013-02-28
The present proposal addresses the acoustic and thermal instrumentation, tests and modelling of engine surface coolers in representative aerodynamic conditions. In addition to aerodynamic tests already performed on surface coolers in a regional funded project, complementary t...
Programme: FP7-JTI
Record Number: 97987
Last updated on: 2017-05-29
Electrical Harness and Wires Analysis and optimiZation
ID: 255866
Start date: 2010-02-01, End date: 2010-07-31
EHWAZ is a professional software solution dedicated to the sizing, analysis and optimization of electrical wire harnesses in aeronautic context. Starting from an electrical harness definition (logical and wire harness CAD-info and equipment definition), the tool checks whethe...
Programme: FP7-JTI
Record Number: 98040
Last updated on: 2017-05-29
Theories and Numerical code for prediction of near and far field noise generated by new generation propellers and Open Rotor blades
ID: 255860
Start date: 2010-01-01, End date: 2010-09-30
The inherently high propulsive efficiency of advanced propellers and Counter-Rotating Open Rotors (CROR) have a great potential for fuel savings, but the level of noise emitted by the open blades represent a major obstacle to their environmental acceptance. Consequently, the ...
Programme: FP7-JTI
Record Number: 98006
Last updated on: 2017-05-29
An open simulation environment for self-diagnosis and prognosis in composite aero-structures
ID: 255837
Start date: 2009-11-01, End date: 2013-03-31
The scope of this work is to develop an integrated environment called OSAS platform. This platform will be able to perform diagnostics and prognostics using exclusively simulated instead of real data. Moreover it will be able to optimise the design of composite aero – structu...
Programme: FP7-JTI
Record Number: 98036
Last updated on: 2017-05-29
DESIGN, MANUFACTURING AND RELIABILITY EVALUATION OF EMBEDDED SENSOR
ID: 255820
Start date: 2010-01-01, End date: 2011-01-31
The objective of this activity is to design and manufacture composite specimens integrating fibre optic sensors, evaluate the reliability of the sensors, develop a concept to evaluate the system reliability and define a design of experiments of sensorized structures. The purp...
Programme: FP7-JTI
Record Number: 100875
Last updated on: 2017-05-29
INTELLIGENT STRESS HEALTH MONITORING
[PROJECT] INTELLI-SHM - INTELLIGENT STRESS HEALTH MONITORING
ID: 255816
Start date: 2009-12-01, End date: 2011-05-31
The project IntelliSHM will address the following topics: Design of an integrated SHM system, with reduced number of sensors, embedded solutions, Optimum location of sensors, Sensor fault detection by multi-scale methods, Improved diagnostic and prognostic tools. Also this pr...
Programme: FP7-JTI
Record Number: 98035
Last updated on: 2017-05-29
Electric Motor And Sensor design and manufacture
ID: 255811
Start date: 2011-04-01, End date: 2012-06-30
EMAS proposes a technological research program enabling to develop, validate and manufacture eight actuators presenting high performance and high reliability for high speed applications under high temperature environment. Such actuators will be capable of producing 5 N.m torq...
Programme: FP7-JTI
Record Number: 103329
Last updated on: 2017-05-29
Numerical Simulation and Design Optimization of a Lower Fuselage Structure with Advanced Integral Stiffening
ID: 255806
Start date: 2010-01-01, End date: 2010-06-30
This proposal is for the structural analysis and design optimization of the lower fuselage of an aircraft. The objective of the structural optimization is minimum weight and the design constraints fall into two categories; firstly the capability to withstand structural loads ...
Programme: FP7-JTI
Record Number: 98034
Last updated on: 2017-05-29
Development of Synthetic Jet Actuator Hardware for the Green Regional Aircraft Low Noise Configuration
ID: 255797
Start date: 2010-02-15, End date: 2011-04-14
Call JTI-CS-2009-1-GRA-02-003 requires an effective, efficient and reliable Synthetic Jet Actuator (SJA) system to be supplied as a complete plug-and play unit for wind tunnel testing. Based on recent experience gained in the EU FP6 AVERT programme in which this capability wa...
Programme: FP7-JTI
Record Number: 96607
Last updated on: 2017-05-29
INNOVATIVE DESIGN OF HUBS AND PROPELLERS
ID: 255782
Start date: 2010-01-01, End date: 2011-06-30
The IDOHAP proposal is for the detailed design of two CROR models to be installed on an existing wind tunnel test rig. Each model to comprise a pair of hubs and associated propeller blades. This work will be achieved using design engineers experienced in the design of complex...
Programme: FP7-JTI
Record Number: 98033
Last updated on: 2017-05-29
12 3 4 5 6 > 
List retrieved on: 2017-10-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top