Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP7
All
FP7-JTI (35)

Country

Austria (2)
Finland (1)
France (11)
Germany (10)
Greece (1)
Hungary (1)
Italy (6)
Netherlands (5)
Romania (1)
Spain (16)
Sweden (4)
Switzerland (4)
United Kingdom (8)

Language

English (35)

Advanced search

Results 1 - 10 of 35
Order by: Results/page:
12 3 4 > 
Developement of CNT doped reinforced aircraft composite parts and a 
ssociated tooling, using the Liquid Resin Infusion method
ID: 325967
Start date: 2013-08-01, End date: 2016-03-31
BULCANATU project wants to develop feasible techniques for advanced and cost effective composite manufacturing of aviation parts. The development of new epoxy resin Carbon Nanotube doping techniques compatible with Liquid Resin Infusion will open a new era on fabrication of a...
Programme: FP7-JTI
Record Number: 110472
Last updated on: 2017-04-10
WING STRUCTURAL TEST DEVELOPMENT METHOD
ID: 325978
Start date: 2013-01-14, End date: 2016-10-13
The proposal approach innovative solutions for the design and manufacturing of the test rig and the definition of the method and prformance for the structural testing of two different kinds of configuration for the outer wings within a Smart Fixed Wing Aircraft. The WISDOM pr...
Programme: FP7-JTI
Record Number: 108866
Last updated on: 2017-01-23
Experimental Subsonic Investigation of a Complete Aircraft Propulsion system Installation and Architecture power plant optimization
ID: 325954
Start date: 2013-06-01, End date: 2017-02-28
The proposed project tackles a CfP from the JTI-GRA ITD. Is focuses on the experimental optimization of a regional aircraft configuration and a subsequent optimization of take-off/ landing configuration. The regional aircraft has a wing designed for natural laminar flow, fuse...
Programme: FP7-JTI
Record Number: 110471
Last updated on: 2016-12-26
Rolled-Only IN718 Ring-shaped Components
ID: 325974
Start date: 2013-03-01, End date: 2016-02-29
The objective of this proposal is to develop and validate a robust and reliable ring-rolling-only route for manufacturing IN718 alloy near-net-shaped rotating aero-engine disk components, RORC (e.g., low-pressure turbine disks). The material and mechanical response of the ROR...
Programme: FP7-JTI
Record Number: 108809
Last updated on: 2016-11-07
High performance composites for demanding high Temperature applications
ID: 325939
Start date: 2013-03-01, End date: 2015-09-30
One of the major limitations of polymeric composites for structural applications is the ability of the matrix to withstand and maintain load transfer capability at high temperatures. The current project, HicTac, address this drawback and aims at development of composites capa...
Programme: FP7-JTI
Record Number: 109261
Last updated on: 2016-09-12
Development of physically based simulation chain for microstructure evolution and resulting mechanical properties focused on additive manufacturing processes
ID: 326020
Start date: 2013-07-01, End date: 2016-08-31
Powder bed based additive manufacturing processes belong to the key technologies of the future. They allow the production of complex shaped components from powder with nearly no waste. However, to optimize the process and the properties of the components, it is fundamental to...
Programme: FP7-JTI
Record Number: 111099
Last updated on: 2016-08-22
Design and Manufacturing of Baseline Low-Speed, Low-Sweep Wind Tunnel Model
ID: 325940
Start date: 2013-06-01, End date: 2016-12-31
The EULOSAM project will deliver a large scale half-model to be tested in a pressurized low speed wind tunnel (WT). The model design will be performed under a previous CfP topic (JTI-CS-2010-3-SFWA-02-007), while Dassault Aviation will deliver a fuselage that has to be modifi...
Programme: FP7-JTI
Record Number: 110883
Last updated on: 2016-07-08
Drivetrain Rolling Elements in Aeronautics, Design and Sizing for
ID: 325999
Start date: 2013-02-01, End date: 2016-06-30
In the scope of the development of a more electrical aircraft, this subject aims at the development and the experimental validation of a reliable sizing method for mechanical transmission elements, specifically screw drives and thrust bearings of aeronautic flight control act...
Programme: FP7-JTI
Record Number: 109429
Last updated on: 2016-05-09
ROTATING COWLS
[PROJECT] LIGHT-COWLS - ROTATING COWLS
ID: 325993
Start date: 2013-03-25, End date: 2016-11-24
The Project LIGHT-COWLS is aimed to find out a way to produce rotating nacelle components for aircraft engines by using composites materials with high Tg, production method can be RTM or ATL. In particular the design and manufacturing of rotating nacelle of the CROR is target...
Programme: FP7-JTI
Record Number: 109156
Last updated on: 2016-04-26
Rotating nozzle
[PROJECT] R-NOZZLE - Rotating nozzle
ID: 325981
Start date: 2013-02-15, End date: 2016-11-14
The Project R-NOZZLE is aimed to find out a way to produce 360º components for aircraft engines by combination of near-net-shape rolled ring process, plus machining. In particular the design and manufacturing of rotating exhaust nozzle of the CROR is targeted. The materials t...
Programme: FP7-JTI
Record Number: 108867
Last updated on: 2016-04-26
12 3 4 > 
List retrieved on: 2017-08-18
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top