Objective The set up of clear and rigorous methodologies of hydrogen measurement is mandatory to continue the development of coated steel products with high strength and sensitive microstructures to hydrogen embrittlement. How to measure 0.1 mass ppm of hydrogen which diffuses very rapidly at room temperature and is present in numerous sources of contamination?The work program is divided into five inter-related work packages to answer concretely to the metallurgist requests: calibration of analysers, sample preparation, bulk analysis, local analysis, distinction of traps and origin of hydrogen. Programme(s) ECSC-COAL-STEEL-RTD C - Research Programme of the Research Fund for Coal and Steel Topic(s) Data not available Call for proposal Data not available Funding Scheme Data not available Coordinator MAX PLANCK INSTITUT FUER EISENFORSCHUNG GMBH EU contribution No data Address MAX PLANCK STRASSE 1 DUESSELDORF Germany See on map Total cost No data Participants (3) Sort alphabetically Sort by EU Contribution Expand all Collapse all CENTRE DE RECHERCHES METALLURGIQUES ASBL Belgium EU contribution No data Address Avenue Ariane 5 BRUXELLES See on map Total cost No data THYSSENKRUPP STEEL A.G. Germany EU contribution No data Address Kaiser Wilhem Strasse 100 DUISBURG See on map Total cost No data VOEST ALPINE STAHL GMBH Austria EU contribution No data Address VOEST ALPINE STRASSE 3 LINZ See on map Total cost No data