Skip to main content
European Commission logo print header

Composite fuselage section Wafer Design Approach for Safety Increasing in Worst Case Situations and Joints Minimizing

Objective

Aeronautics is a key asset for the future of Europe, but nowadays the industry has to face the challenge of “More Affordable, Safer, Cleaner and Quieter” while at the same time accounting for a demand that will triple over the next 20 years. WASIS project aims to rise to this challenge with the development of a composite fuselage structure based on the lattice stiffening concept, optimizing geometrical and mass properties of transition zones of fuselage structural joints. Project overall concept is focused on simultaneous meeting environmental demands and rising safety coupled with design and manufacturing cost-efficiency improvement.

The lattice approach allows composites to obtain more efficient mechanical behaviour, reducing weight and optimizing structure performance, which will be proved by comparative simulations against other approaches. This will be combined with specially designed semi-loop and micro-pin joining elements to provide the ability of innovative non-regular lattice structure manufacturing, save aircraft weight, avoid fuselage section weakening due to cutting reinforcement fibres.

Furthermore, the structure will also be developed to better withstand worst situation loadings, assessing safety through the large adoption of simulation and virtual testing from the very first design stages to analyze explosions and material damping. Developed innovative fuselage section design will be merged with high-productive filament winding technology to reduce manufacturing costs and time, and samples will be manufactured in order to prove how the different concepts fit together. Complete testing of the samples will be applied to prove the wafer approach. As a result of this project integrated approach – sufficient fuselage weight savings, manufacturing cost/time efficiency and safety increasing are to be achieved.

Call for proposal

FP7-AAT-2010-RTD-1
See other projects for this call

Coordinator

FUNDACION CIDAUT
EU contribution
€ 463 607,00
Address
PLAZA VICENTE ALEIXANDRE CAMPOS 2 PQ TECNOLOGICO DE BOECILLO 209
47151 Valladolid
Spain

See on map

Region
Centro (ES) Castilla y León Valladolid
Activity type
Research Organisations
Administrative Contact
Maria Teresa Fernandez Peña (Dr.)
Links
Total cost
No data

Participants (13)