Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (219)
Report Summary (42)

Country

Belgium (55)
Denmark (36)
France (161)
Germany (146)
Greece (22)
Ireland (20)
Italy (81)
Luxembourg (6)
Netherlands (50)
Portugal (12)
Spain (34)
United Kingdom (137)

Advanced search

Search projects and results

Results 1 - 10 of 261
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: RI1B0247
Start date: 1988-11-01, End date: 1991-10-31
By using the latest theory of fluid flows in engines and combining it with existing computational fluid dynamics (CFD) software, this project created software models for engine design. The software, which uses two different methods, provides models delineating the behaviour o...
Programme: FP1-BRITE
Record Number: 6319
Last updated on: 1992-04-14
The RASOS software provides a comprehensive capability for the safety assessment of jacket type offshore structures which includes structural and load modelling, deterministic linear and nonlinear analysis, fatigue and fracture assessment, system reliability analysis using fai...
Programme: FP1-BRITE
Record Number: 10775
Last updated on: 1994-09-12
[REPORT SUMMARY] Coating
Self stratifying coatings have been developed which allow two different functional coats to be applied in one operation. Anexample would be an anticorrosive primer anf a durable top caot. The systems offer time and cost saving benefits as well as a technological benefit due to...
Programme: FP1-BRITE
Record Number: 1480
Last updated on: 1996-09-27
[REPORT SUMMARY] Computer aided arc welding
To avoid the disadvantages of the teach in method, a new knowledge based off line programming system for industrial robots has been developed. This system realizes the following advantages in comparison to the existing programming systems for arc welding: consideration of spec...
Programme: FP1-BRITE
Record Number: 12040
Last updated on: 1996-09-20
Experimental methods for the characterisation of mechanical properties, chemical composition and morphological structure of rubber samples, taken from critical failure regions were developed. Changes induced on rubber compounds by service life in high severity conditions were ...
Programme: FP1-BRITE
Record Number: 1296
Last updated on: 1996-10-24
Research developments include: manufacture of the test coupons and polymet rods in the main aero bearing steels, M50 and Tl, and also the new carburising steel M50 NiL; design, manufacture and commissioning of component handling and beam scanning systems, including a dedicated...
Programme: FP1-BRITE
Record Number: 1463
Last updated on: 1996-10-24
New possibilities for flexible low cost automation of welding in the heavy industries have been studied. This involved development of fairly simple automation of the welding of subcomponents, a large scale shift to mechanical welding processes and application of welding robots...
Programme: FP1-BRITE
Record Number: 7259
Last updated on: 1996-10-11
The small and medium sized enterprise (SME) mould making industry has been strengthened by developing new integrated computer aided design/computer aided manufacture (CAD/CAM) functions and links to production equipment. This has allowed design optimisation, production set up,...
Programme: FP1-BRITE
Record Number: 1839
Last updated on: 1996-10-24
The main objective of the project was the development of new inspection techniques based on the use of PVDF probes in intelligent signal processing systems. The transducer probes produced were either single transducer, or linear and 2-dimensional transducer arrays, the latter ...
Programme: FP1-BRITE
Record Number: 1608
Last updated on: 1995-03-22
ID: RI1B0304
Start date: 1989-06-01, End date: 1993-09-30
THE PROJECT IS CONCERNED WITH NOVEL METHODS OF INCREASING THE ELECTRODEPOSITION RATES OF METALS WHILST ACHIEVING AT LEAST EQUIVALENT PROPERTIES COMPARED WITH THOSE OBTAINED FROM CONVENTIONAL TECHNIQUES.BOTH THEORETICAL AND EXPERIMENTALK APPROACHES WILL BE EMPLOYED.THE THEORETI...
Programme: FP1-BRITE
Record Number: 6427
Last updated on: 1992-05-06
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-05-27
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top