Objetivo The proposed project will focus on the validation of a TSAA process, including pre- and post-treatment, which is defined by the topic manager, and its implementation in industrial scale. An existing industrial plant, which will be selected by the topic manager, will be benchmarked with respect to the number and dimensioning of the components of the plant and its periphery with respect to the technical requirements for the process. The process itself will be performed in laboratory- and pilot scale to verify the reproducibility of the process for given aluminium alloy(s) and to characterize and quantify the properties of the surface of specimens after each step of the TSAA process. Failure mode analyses, such as FTA (failure tree analysis), DRBFM (Design review based on failure mode) and FEMS (Failure modes and effects analysis) will be performed. Knowledge-based analysis of the process and the relevant parameters, such as temperature and filtration, as well as the aforementioned failure mode analysis, will lead to the definition of process sheets and risk assessment plan. Environmental analysis of the process will consider chemicals used – also with respect to REACh compliance -, exhaust fumes (especially in the working area), waste and waste water output. As far as possible, recycling routs for process waters and chemical components will be analysed and suggested. Risk analysis will also include possible health risks in the working area, which can origin by incorrect use of chemicals or waste. The results of the analysis of environmental and health risks will be included into the process sheets and risk assessment plan. Data and process-relevant knowledge gained during the aforementioned analysis steps will finally lead to elaboration of a manufacturing plan and compilation of a Process procedures and standard manual. Ámbito científico engineering and technologyenvironmental engineeringwater treatment processeswastewater treatment processesnatural scienceschemical sciencesinorganic chemistrypost-transition metalsengineering and technologymaterials engineeringcoating and films Programa(s) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Tema(s) JTI-CS-2012-3-ECO-01-058 - Validation of TSAA coating technology. Development of procedures and standards manual. Technical and economical study Convocatoria de propuestas SP1-JTI-CS-2012-03 Consulte otros proyectos de esta convocatoria Régimen de financiación JTI-CS - Joint Technology Initiatives - Clean Sky Coordinador CEST KOMPETENZZENTRUM FUR ELEKTROCHEMISCHE OBERFLACHENTECHNOLOGIE GMBH Aportación de la UE € 33 575,01 Dirección VIKTOR KAPLAN STRASSE 2 2700 Wiener Neustadt Austria Ver en el mapa Región Ostösterreich Niederösterreich Niederösterreich-Süd Tipo de actividad Research Organisations Contacto administrativo Norica-Carmen Godja (Mrs.) Enlaces Contactar con la organización Opens in new window Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo HIRTENBERGER ENGINEERED SURFACES GMBH Austria Aportación de la UE € 34 880,76 Dirección LEOBERSDORFER STRASSE 31-33 2552 HIRTENBERG Ver en el mapa Región Ostösterreich Niederösterreich Niederösterreich-Süd Tipo de actividad Private for-profit entities (excluding Higher or Secondary Education Establishments) Contacto administrativo Selma Hansal (Dr.) Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Coste total Sin datos