Control of the temperature of the bar on entry to the finisher

Projektinformationen

ID Finanzhilfevereinbarung: 7215-PP-030

Projekt abgeschlossen

Startdatum 1 Juli 1999

Enddatum 30 Juni 2001

Finanziert unter

• Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Gesamtkosten € 2 002 000,00

EU-Beitrag € 800 800,00

Koordiniert durch

CENTRE DE RECHERCHES METALLURGIQUES
Belgium

Ziel

The aim of this project is to design, build and test, in the normal operating conditions of the hot strip mill, a new short cooling equipment placed between the roughing and the finishing mill, in order to cool, in a very fast and controllable way, the bar coming out of the roughing mill. As far as the products are concerned, the effect of the bar cooling strategy will be assessed for different steel grades. Laboratory trials will be conducted in parallel to the industrial trials. With regard to the process, the following aspects will be analysed, among others: cooling rate, homogeneity, possibility of reduction of though thickness heterogeneity, efficiency of the descaler after bar cooling.

Programm/Programme

• ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Thema/Themen

• T2 - Continuous casting

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

CENTRE DE RECHERCHES METALLURGIQUES

• EU-Beitrag: Keine Daten
• Adresse: Rue Ernest Solvay, 11 ; 4000 LIEGE ; Belgien
• Gesamtkosten: Keine Daten

Beteiligte (1)

SIDMAR

Belgien

• EU-Beitrag: Keine Daten
• Adresse: John Kennedylaan 51 ; 9042 GENT
• Gesamtkosten: Keine Daten