Objectif The "Ferritic Rolling" practice is very well suited for processing different products. The production of low cost CQ grades from low C steel is already under control. However, it appears clearly, from laboratory scale simulation, that a very efficient lubrication in the HSM is needed in order to improve quality, to extend production to DQ or DDQ and to develop new grades. The aim of the project is to develop and test a hot rolling lubrication strategy in order to improve the mechanical properties of the steel products after hot rolling at low temperature in the "ferrite" region. Fundamental and complementary aspects of product and process developments will be covered in this project. As far as the process is concerned, the plan includes the development of the lubrication strategy in order to decrease the friction coefficient to very low values. Concerning the products, the effect of the new lubrication strategy will be assessed on products (ULC-IF), not rolled in the ferrite region. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) T2 - Continuous casting Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CENTRE DE RECHERCHES METALLURGIQUES Contribution de l’UE Aucune donnée Adresse Rue Ernest Solvay, 11 4000 LIEGE Belgique Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire COCKERILL SAMBRE Belgique Contribution de l’UE Aucune donnée Adresse Quai du Halage, 10 4400 FLEMALLE Voir sur la carte Coût total Aucune donnée INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE France Contribution de l’UE Aucune donnée Adresse Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Voir sur la carte Coût total Aucune donnée THYSSEN KRUPP STAHL Allemagne Contribution de l’UE Aucune donnée Adresse Kaiser-Wilhelm-Strasse 100 47166 DUISBURG Voir sur la carte Coût total Aucune donnée