Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Development of a robotic maintenance system for wind turbine blades

Description du projet

Les robots révolutionnent l’inspection et la réparation des éoliennes

Les éoliennes sont censées durer entre 20 et 25 ans, à conditions qu’elles fassent l’objet d’une maintenance adéquate qui assure leur bon en état de fonctionnement en tout temps. Les techniques d’inspection actuelles, y compris l’utilisation de drones, se limitent à la détection des défauts de surface. Le projet Romain, financé par l’UE, développera une solution d’inspection et de réparation robotique des pales d’éoliennes, implantées sur terre comme en mer. En intégrant la thermographie et le cisaillement au chauffage par laser, il sera possible de réaliser des inspections in situ capables de détecter les défauts de surface et sous la surface des pales. En outre, le projet mettra au point un système de déploiement robotique qui abritera l’unité d’inspection et un bras de réparation robotisé actionné par des ingénieurs au sol ou à bord d’un navire (pour les parcs éoliens en mer). Le bras de réparation sera capable de réparer les défauts détectés.

Objectif

The wind energy sector continues growing rapidly even under the pandemic, as an estimated 93GW wind capacity was installed in 2020 globally. After installation, wind turbines are expected to run around 20-25years, during which O&M (operation and maintenance) becomes crucial in maximising the economic and environmental benefits of wind assets. This project aims to develop a complete solution for robotic based inspection and repair of wind turbine blades (WTBs), both onshore and offshore. Firstly, we will integrate thermography and shearography with laser heating, so that advanced lock-in techniques will be achieved for in-situ inspection of both surface and subsurface defects within WTBs. (Current techniques including drone-based are limited to surface defects only). Secondly, a compact and efficient robotic deployment system will be developed which will hold the inspection unit and a robotic repair arm. The robotic system will be operated by engineers working on ground (for onshore wind farms) or on a vessel (for offshore wind farms). When defects are detected and deemed reparable, the repair arm of the whole system will be activated to rapidly repair the faulty area of composite components by resistance welding for joining and/or disassembly. Comparing to the traditional adhesively bonding for repair, the proposed resistance welding with optimised processing would significantly reduce the curing cycles/time with much fewer preparation for surface treatment steps while it will be more easily designed to integrate with robotic arm. The whole system will be operated remotely by engineers working on ground or on a vessel without risking their lives working in the sky on WTBs. Field trials on wind towers will be conducted to validate the system.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

HORIZON-IA - HORIZON Innovation Actions

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-CL4-2021-DIGITAL-EMERGING-01

Voir tous les projets financés au titre de cet appel

Coordinateur

CNET CENTRE FOR NEW ENERGY TECHNOLOGIES SA
Contribution nette de l'UE
€ 158 849,78
Adresse
RUA CIDADE DE GOA 2
2685-038 LOURES
Portugal
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
€ 289 528,26

Participants (6)

Partenaires (3)