Industrial Thermal Energy Recovery Conversion and Management

Informations projet

I-ThERM

N° de convention de subvention: 680599

DOI

10.3030/680599

Projet clôturé

Date de signature de la CE 31 Juillet 2015

Date de début 1 Octobre 2015

Date de fin 31 Mars 2021

Financé au titre de

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Coût total

€ 3 996 168,75

Contribution de l’UE

€ 3 996 168,75

Coordonné par

BRUNEL UNIVERSITY LONDON
United Kingdom

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Websites, patent fillings, videos etc. (2)

Preparation of dissemination material
Launch website

Documents, reports (15)

Report on energy performance of TFC system
Report on estimation of energy, environmental and economic potential for heat recovery in EU28

Report on estimation of energy environmental and economic potential for heat recovery in EU28

Chemical and thermal characterization of the hot flue gas
Literature review of energy use and potential for heat recovery in the EU28
Coating protocols involving best practices
Case study material on successful application of heat recovery technologies
Report on the energy, economic and environmental performance of the technologies and market assessment

Report on the energy economic and environmental performance of the technologies and market assessment

Coating testing protocols
Evaluation report: monitoring data from demo sites and validation of EINSTEIN predictions

Evaluation report monitoring data from demo sites and validation of EINSTEIN predictions

Report on energy performance of sCO2 system
Report on operating environment of FHPS
Evaluation of the coatings properties and performance (incl. wetting, corrosion etc)

Evaluation of the coatings properties and performance incl wetting corrosion etc

Data management and open access strategy
Report on barriers and recommendations on how to overcome them
Database of papers and journals related to coatings

Other (1)

General demonstration functionality of EINSTEIN

upgraded software release with increased userfriendly capabilities in terms of installation manual examples the deliverable will contain specific sections to address the comments on D33 and D34 during the RP2 review additional content will relate to the installation and operating manual of the software and some examples on the IThERM demonstration cases as well as the solution of the case studies provided by the experts

Publications

Peer reviewed articles (36)

Transient analysis and control of a heat to power conversion unit based on a simple regenerative supercritical CO2 Joule-Brayton cycle

Auteurs: Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou
Publié dans: Applied Thermal Engineering, Numéro 183, 2021, Page(s) 116214, ISSN 1359-4311
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2020.116214

Adoption of Waste Heat Recovery Technologies: Reviewing the Relevant Barriers and Recommendations on How to Overcome Them

Auteurs: Paul Christodoulides, Lazaros Aresti, Gregoris P. Panayiotou, Savvas Tassou, Georgios A. Florides
Publié dans: Operations Research Forum, 2022, Page(s) Article number: 3, ISSN 2662-2556
Éditeur: Springer
DOI: 10.1007/s43069-021-00108-6

Waste Heat Recovery Technologies Revisited with Emphasis on New Solutions, Including Heat Pipes, and Case Studies

Auteurs: Paul Christodoulides; Rafaela Agathokleous; Lazaros Aresti; Soteris A. Kalogirou; Savvas A. Tassou; Georgios A. Florides
Publié dans: Energies, Vol 15, Iss 384, p 384 (2022), 2022, ISSN 1996-1073
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en15010384

Performance Analysis of Heat Exchangers and Integrated Supercritical CO2 Brayton Cycle for Varying Heat Carrier, Cooling and Working Fluid Flow Rates

Auteurs: Lei Chai, Savvas A Tassou
Publié dans: Heat Transfer Engineering, 2022, ISSN 1521-0537
Éditeur: Taylor and Francis
DOI: 10.1080/01457632.2022.2140640

A review of printed circuit heat exchangers for helium and supercritical CO2 Brayton cycles

Auteurs: Lei Chai; Savvas A. Tassou
Publié dans: Thermal Science and Engineering Progress, Numéro Volume 18, 1 August 2020, 100543, 2020, ISSN 2451-9049
Éditeur: Elsevier
DOI: 10.1016/j.tsep.2020.100543

A REVIEW OF HEAT TRANSFER OF CO2 AT SUPERCRITICAL PRESSURE IN THE CRITICAL AND PSEUDO-CRITICAL REGION

Auteurs: Chai L, Tassou S A
Publié dans: Journal of Enhanced Heat Transfer, 2022, Page(s) Volume 29, Numéro 4, 2022, pp. 1-40, ISSN 1563-5074
Éditeur: Begell Digital Portal
DOI: 10.1615/jenhheattransf.2022041468

Overview and outlook of research and innovation in energy systems with carbon dioxide as the working fluid

Auteurs: Giuseppe Bianchi; Giorgio Besagni; Savvas A. Tassou; Christos N. Markides
Publié dans: Applied Thermal Engineering, 2021, ISSN 1359-4311
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2021.117180

Review of supercritical CO 2 technologies and systems for power generation

Auteurs: Martin T. White, Giuseppe Bianchi, Lei Chai, Savvas A. Tassou, Abdulnaser I. Sayma
Publié dans: Applied Thermal Engineering, Numéro 185, 2021, Page(s) 116447, ISSN 1359-4311
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2020.116447

One-Dimensional Modelling of a Trilateral Flash Cycle System with Two-Phase Twin-Screw Expanders for Industrial Low-Grade Heat to Power Conversion

Auteurs: Giuseppe Bianchi, Matteo Marchionni, Stuart Kennedy, Jeremy Miller, Savvas Tassou
Publié dans: 4th Forum on CFD in Positive Displacement Machines, 2019, ISSN 2504-3900
Éditeur: MDPI
DOI: 10.3390/designs3030041

Recent Progress on High Temperature and High Pressure Heat Exchangers for Supercritical CO2 Power Generation and Conversion Systems

Auteurs: Lei Chai, Savvas A Tassou
Publié dans: Heat Transfer Engineering, 2023, ISSN 1521-0537
Éditeur: Taylor and Francis
DOI: 10.1080/01457632.2022.2164683

Evaluation of Zn- and Fe- rich organic coatings for corrosion protection and condensation performance on waste heat recovery surfaces

Auteurs: Pavlos K. Pandis; Stamatoula Papaioannou; Vasileios Siaperas; Antypas Terzopoulos; Vassilis N. Stathopoulos
Publié dans: International Journal of Thermofluids, Numéro Volumes 3–4, May 2020, 100025, 2020, ISSN 2666-2027
Éditeur: Elsevier
DOI: 10.1016/j.ijft.2020.100025

Preliminary assessment of waste heat potential in major European industries

Auteurs: Gregoris P. Panayiotou, Giuseppe Bianchi, Giorgos Georgiou, Lazaros Aresti, Maria Argyrou, Rafaela Agathokleous, Konstantinos M. Tsamos, Savvas A. Tassou, Georgios Florides, Soteris Kalogirou, Paul Christodoulides
Publié dans: Energy Procedia, Numéro 123, 2017, Page(s) 335-345, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2017.07.263

Techno-economic comparison of different cycle architectures for high temperature waste heat to power conversion systems using CO 2 in supercritical phase

Auteurs: Matteo Marchionni, Giuseppe Bianchi, Konstantinos M. Tsamos, Savvas A. Tassou
Publié dans: Energy Procedia, Numéro 123, 2017, Page(s) 305-312, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2017.07.253

Two-phase chamber modeling of a twin-screw expander for Trilateral Flash Cycle applications

Auteurs: Giuseppe Bianchi, Stuart Kennedy, Obadah Zaher, Savvas A. Tassou, Jeremy Miller, Hussam Jouhara
Publié dans: Energy Procedia, Numéro 129, 2017, Page(s) 347-354, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2017.09.208

Design of radial turbomachinery for supercritical CO 2 systems using theoretical and numerical CFD methodologies

Auteurs: Norman Holaind, Giuseppe Bianchi, Maxence De Miol, Samira Sayad Saravi, Savvas A. Tassou, Arthur Leroux, Hussam Jouhara
Publié dans: Energy Procedia, Numéro 123, 2017, Page(s) 313-320, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2017.07.256

Techno-economic survey and design of a pilot test rig for a trilateral flash cycle system in a steel production plant

Auteurs: Rebecca McGinty, Giuseppe Bianchi, Obadah Zaher, Steven Woolass, David Oliver, Christopher Williams, Jeremy Miller
Publié dans: Energy Procedia, Numéro 123, 2017, Page(s) 281-288, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2017.07.242

Experimental investigation on a flat heat pipe heat exchanger for waste heat recovery in steel industry

Auteurs: Hussam Jouhara, Sulaiman Almahmoud, Amisha Chauhan, Bertrand Delpech, Theodora Nannou, Savvas A. Tassou, Rocio Llera, Francisco Lago, Juan José Arribas
Publié dans: Energy Procedia, Numéro 123, 2017, Page(s) 329-334, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2017.07.262

Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry

Auteurs: Hussam Jouhara, Sulaiman Almahmoud, Amisha Chauhan, Bertrand Delpech, Giuseppe Bianchi, Savvas A. Tassou, Rocio Llera, Francisco Lago, Juan José Arribas
Publié dans: Energy, Numéro 141, 2017, Page(s) 1928-1939, ISSN 0360-5442
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2017.10.142

Numerical modelling of a two-phase twin-screw expander for Trilateral Flash Cycle applications

Auteurs: Giuseppe Bianchi, Stuart Kennedy, Obadah Zaher, Savvas A. Tassou, Jeremy Miller, Hussam Jouhara
Publié dans: International Journal of Refrigeration, 2018, ISSN 0140-7007
Éditeur: Elsevier BV
DOI: 10.1016/j.ijrefrig.2018.02.001

Techno-economic assessment of Joule-Brayton cycle architectures for heat to power conversion from high-grade heat sources using CO 2 in the supercritical state

Auteurs: Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou
Publié dans: Energy, Numéro 148, 2018, Page(s) 1140-1152, ISSN 0360-5442
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2018.02.005

Droplet Mobility Manipulation on Porous Media Using Backpressure

Auteurs: N. Vourdas, G. Pashos, G. Kokkoris, A. G. Boudouvis, V. N. Stathopoulos
Publié dans: Langmuir, Numéro 32/21, 2016, Page(s) 5250-5258, ISSN 0743-7463
Éditeur: American Chemical Society
DOI: 10.1021/acs.langmuir.6b00900

Numerical investigations of a Trilateral Flash Cycle under system off-design operating conditions

Auteurs: Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou, Obadah Zaher, Jeremy Miller
Publié dans: Energy Procedia, Numéro 161, 2019, Page(s) 464-471, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2019.02.070

Numerical modelling and performance maps of a printed circuit heat exchanger for use as recuperator in supercritical CO2 power cycles

Auteurs: Matteo Marchionni, Lei Chai, Giuseppe Bianchi, Savvas A. Tassou
Publié dans: Energy Procedia, Numéro 161, 2019, Page(s) 472-479, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2019.02.068

Waste Heat Recovery in the EU industry and proposed new technologies

Auteurs: Rafaela Agathokleous, Giuseppe Bianchi, Gregoris Panayiotou, Lazaros Arestia, Maria C. Argyrou, Giorgos S. Georgiou, Savvas A. Tassou, Hussam Jouhara, Soteris A. Kalogirou, Georgios A. Florides, Paul Christodoulides
Publié dans: Energy Procedia, Numéro 161, 2019, Page(s) 489-496, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2019.02.064

Design of a high-temperature heat to power conversion facility for testing supercritical CO2 equipment and packaged power units

Auteurs: Giuseppe Bianchi, Samira S. Saravi, Romain Loeb, Konstantinos M. Tsamos, Matteo Marchionni, Arthur Leroux, Savvas A. Tassou
Publié dans: Energy Procedia, Numéro 161, 2019, Page(s) 421-428, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2019.02.109

Design criteria for coatings in next generation condensing economizers

Auteurs: Nikolaos Vourdas, Hussam Jouhara, Savvas A. Tassou, Vassilis N. Stathopoulos
Publié dans: Energy Procedia, Numéro 161, 2019, Page(s) 412-420, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2019.02.095

Effect of cross-section geometry on the thermohydraulic characteristics of supercritical CO2 in minichannels

Auteurs: Lei Chai, Savvas A Tassou
Publié dans: Energy Procedia, Numéro 161, 2019, Page(s) 446-453, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2019.02.077

Numerical study of the thermohydraulic performance of printed circuit heat exchangers for supercritical CO2 Brayton cycle applications

Auteurs: Lei Chai, Savvas A Tassou
Publié dans: Energy Procedia, Numéro 161, 2019, Page(s) 480-488, ISSN 1876-6102
Éditeur: Elsevier
DOI: 10.1016/j.egypro.2019.02.066

A Review of Airside Heat Transfer Augmentation with Vortex Generators on Heat Transfer Surface

Auteurs: Lei Chai, Savvas Tassou
Publié dans: Energies, Numéro 11/10, 2018, Page(s) 2737, ISSN 1996-1073
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en11102737

Evaluation of organic coatings for corrosion protection of condensing economizers

Auteurs: I. Iliopoulos, A. Karampekios, P.K. Pandis, N. Vourdas, H. Jouhara, S. Tassou, V.N. Stathopoulos
Publié dans: Procedia Structural Integrity, Numéro 10, 2018, Page(s) 295-302, ISSN 2452-3216
Éditeur: Elsevier
DOI: 10.1016/j.prostr.2018.09.041

Numerical modelling and transient analysis of a printed circuit heat exchanger used as recuperator for supercritical CO2 heat to power conversion systems

Auteurs: Matteo Marchionni, Lei Chai, Giuseppe Bianchi, Savvas A. Tassou
Publié dans: Applied Thermal Engineering, Numéro 161, 2019, Page(s) 114190, ISSN 1359-4311
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2019.114190

Review of supercritical carbon dioxide (sCO2) technologies for high-grade waste heat to power conversion

Auteurs: Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou
Publié dans: SN Applied Sciences, Numéro 2/4, 2020, ISSN 2523-3963
Éditeur: Springer Nature
DOI: 10.1007/s42452-020-2116-6

Modelling and off-design performance optimisation of a trilateral flash cycle system using two-phase twin-screw expanders with variable built-in volume ratio

Auteurs: Giuseppe Bianchi, Matteo Marchionni, Jeremy Miller, Savvas A. Tassou
Publié dans: Applied Thermal Engineering, Numéro 179, 2020, Page(s) 115671, ISSN 1359-4311
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2020.115671

Modeling and Evaluation of the Thermohydraulic Performance of Compact Recuperative Heat Exchangers in Supercritical Carbon Dioxide Waste Heat to Power Conversion Systems

Auteurs: Lei Chai, Savvas a Tassou
Publié dans: Heat Transfer Engineering, 2021, Page(s) 1067-1082, ISSN 1521-0537
Éditeur: Taylor and Francis
DOI: 10.1080/01457632.2021.1943833

A Review of Airside Heat Transfer Augmentation with Vortex Generators on Heat Transfer Surface

Auteurs: Lei Chai; Savvas A. Tassou
Publié dans: Energies, Vol 11, Iss 10, p 2737 (2018), 2018, ISSN 1996-1073
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)

Inventory control assessment for small scale sCO2 heat to power conversion systems

Auteurs: Matteo Marchionni; Muhammad Usman; Lei Chai; Savvas A. Tassou
Publié dans: Energy, Numéro Volume 267, 15 March 2023, 126537, 2023, ISSN 0360-5442
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2022.126537

Conference proceedings (12)

Numerical investigation of a simple regenerative heat to power system with coupled or independent turbomachinery drives

Auteurs: Matteo Marchionni, Giuseppe Bianchi, Muhammad Usman, Apostolos Pesyridis, Savvas A. Tassou
Publié dans: 4th European sCO2 Conference for Energy Systems, 2021
Éditeur: University of Duisburg-Essen
DOI: 10.17185/duepublico/73949

Industrial Thermal Energy Recovery and Management (I-ThERM)

Auteurs: Savvas A. Tassou
Publié dans: Industry Day of the Institute of Energy Futures, 2016
Éditeur: Brunel University London

Organic Rankine Cycle Systems for Low Temperature Heat to Power Generation

Auteurs: Arthur Leroux
Publié dans: Industry Day of the Institute of Energy Futures, 2016
Éditeur: Brunel University London

Innovations in Low Temperature Heat to Power Generation

Auteurs: Jeremy Miller
Publié dans: Industry Day of the Institute of Energy Futures, 2016
Éditeur: Brunel University London

Heat Exchangers for Industrial Heat Recovery

Auteurs: Hussam Jouhara
Publié dans: Industry Day of the Institute of Energy Futures, 2016
Éditeur: Brunel University London

Design considerations on a small scale supercritical CO2 power system for industrial high temperature waste heat to power recovery applications

Auteurs: Giuseppe Bianchi, Savvas A. Tassou, Yunting Ge, Hussam Jouhara, Konstantinos Tsamos, Arthur Leroux, Maxence de Miol
Publié dans: 1st European Seminar on Supercritical CO2 (sCO2) Power Systems, 2016
Éditeur: TU Wien

Coatings for High Temperature Exhaust Heat Recovery Heat Exchangers

Auteurs: Vassilis Stathopoulos
Publié dans: Industry Day of the Institute of Energy Futures, 2016
Éditeur: Brunel University London

Design of a single-shaft compressor, generator, turbine for small-scale supercritical CO2 systems for waste heat to power conversion applications

Auteurs: De Miol, Maxence, Bianchi, Giuseppe, Henry, Gabriel, Holaind, Norman, Tassou, Savvas A., Leroux, Arthur
Publié dans: 2nd European sCO2 Conference 2018, 2018
Éditeur: Universität Duisburg-Essen
DOI: 10.17185/duepublico/46086

Modelling and performance analysis of a supercritical CO2 system for high temperature industrial heat to power conversion at off-design conditions

Auteurs: Marchionni, Matteo; Saravi, Samira Sayad; Bianchi, Giuseppe; Tassou, Savvas
Publié dans: 3rd European supercritical CO2 Conference, 2019, Page(s) 281-289
Éditeur: Universität Duisburg-Essen
DOI: 10.17185/duepublico/48908

Modelling and performance analysis of heat exchangers for supercritical CO2 power system

Auteurs: Lei Chai, Savvas Tassou
Publié dans: 5th Sustainable Thermal Energy Management International Conference (SusTEM2019), 2019
Éditeur: SusTEM2019

Modelling and Evaluation of the Thermohydraulic Performance of Finned-Tube Supercritical Carbon Dioxide Gas Coolers

Auteurs: Lei Chai, Konstantinos M. Tsamos, Savvas A. Tassou
Publié dans: 16th UK Heat Transfer Conference (UKHTC2019), 2019
Éditeur: UKHTC2019

Dynamics of SCO2 heat to power units equipped with dual tank inventory control system

Auteurs: Matteo Marchionni, Giuseppe Bianchi, Savvas A Tassou
Publié dans: Proceedings of the 6th International Seminoar on ORC Power Systems, 2021, ISBN 978-3-00-070686-8
Éditeur: Technical University of Munich
DOI: 10.14459/2021mp1633135

Book chapters (1)

Modelling and Evaluation of the Thermohydraulic Performance of Finned-Tube Supercritical Carbon Dioxide Gas Coolers

Auteurs: Lei Chai; Konstantinos M. Tsamos; Savvas A. Tassou
Publié dans: Energies, Vol 13, Iss 5, p 1031 (2020), 2020, ISSN 1996-1073
Éditeur: Energies
DOI: 10.3390/en13051031

Other (1)

Design considerations on a small scale supercritical CO2 power system for industrial high temperature waste heat to power recovery applications

Auteurs: Giuseppe Bianchi, Savvas A. Tassou, Yunting Ge, Hussam Jouhara, Konstantinos Tsamos, Arthur Leroux, Maxence de Miol
Publié dans: 1st European Seminar on Supercritical CO2 (sCO2) Power Systems, 2016
Éditeur: TU Wien

Non-peer reviewed articles (1)

Estimating the waste heat recovery in the European Union Industry

Auteurs: Giuseppe Bianchi, Gregoris P. Panayiotou, Lazaros Aresti, Soteris A. Kalogirou, Georgios A. Florides, Kostantinos Tsamos, Savvas A. Tassou, Paul Christodoulides
Publié dans: Energy, Ecology and Environment, 2019, ISSN 2363-7692
Éditeur: Springer Nature
DOI: 10.1007/s40974-019-00132-7

Droits de propriété intellectuelle

Patent (2)

Heat engine

Numéro de demande/publication: GB 171765.1
Date: 2017-10-20
Demandeur(s): SPIRAX-SARCO LIMITED

Heat engine

Numéro de demande/publication: PCT/EP 2018/078376
Date: 2018-10-17
Demandeur(s): SPIRAX-SARCO LIMITED