Integrated Airport Operations

Informations projet

PJ28 IAO

N° de convention de subvention: 731787

DOI

10.3030/731787

Projet clôturé

Date de signature de la CE 16 Novembre 2016

Date de début 1 Decembre 2016

Date de fin 29 Février 2020

Financé au titre de

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coût total

€ 5 066 923,02

Contribution de l’UE

€ 3 546 846,12

Coordonné par

DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV
Germany

Periodic Reporting for period 4 - PJ28 IAO (Integrated Airport Operations)

Période du rapport: 2020-01-01 au 2020-02-29

Résumé du contexte et des objectifs généraux du projet

The SESAR Integrated Airport Operations (IAO) project is a Very Large Scale Demonstration (VLD). Its aim is to show the benefits of Air Traffic Management (ATM) solutions developed in SESAR 1 in an operational environment and to ease their industrial deployment. The project is hence set up to prepare airports for the challenges of the future.

IAO consists of four demonstrations: One on-board exercise and three at the airports of Nice, Budapest, and Hamburg. In those demonstrations IAO will cover ATM solutions in the area of:
•Pre-Departure Sequencing,
•Routing and planning functions for controllers,
•Airport safety nets for Controllers and
•On-board traffic alerts

The new SESAR solutions will assist air traffic controllers in their duty to safely guide aircraft at the airport while also assisting flight crews in navigating safely on the ground.

Travail effectué depuis le début du projet jusqu’à la fin de la période considérée dans le rapport et principaux résultats atteints jusqu’à présent

The final reporting period covered the final preparation and submission of the Demoreport and the execution of the DemoGate.
In addition the project closure was performed.

Progrès au-delà de l’état des connaissances et impact potentiel prévu (y compris l’impact socio-économique et les conséquences sociétales plus larges du projet jusqu’à présent)

As Very Large Scale Demonstration the objective of IAO is to demonstrate airport related SESAR 1 solutions and with it to promote their benefits and readiness for deployment. After the technical development of these ATM solutions in the previous SESAR Programme (SESAR1), IAO will now show their functional readiness in a close-to-operational environment.

To succeed in this main goal IAO wants to prove and demonstrate:
Readiness
• operational readiness of all developed functionalities
• applicability of the demonstrated tools for different local characteristics
• compliance to current standards and regulations including the involvement of respective bodies
• deployment and promotion of the tools developed in SESAR 1 and demonstrated in IAO

Controller Support
• increase in situational awareness by using the demonstrated tools
• adherence to an acceptable controller workload with any of the new functionalities
• benefits of Conformance Monitoring and Conflicting ATC Clearance Alerts

Technology
• the efficiency of routing and planning tools, partly with user interaction
• the improvement of DMAN functions with route planning
• the benefit of using accurate A-SMGCS taxi-time

On the wider implications of the project, the ATM solutions addressed in IAO are considered to:
• Improve airport safety,
• Reduce fuel consumption and
• Reduce overall delays on the airport.