Objectif
The aim of this project is to develop a portable biosensor microsystem able to detect hybridisation of nucleic acids with sensitivity to distinguish single base substitutions, deletions and insertions. It will be mainly applied to studies of comparative expression analysis and identification of single nucleotide polymorphisms (SNPs) in human genes candidates to disease.
The biosensor microsystem will consist of:
i) an array of 20 microcantilevers,
ii) an opticaldetection system of the cantilever motion, and
iii) a polymer microfluidic system.
The hybrid integration of the DNA biochip proposed, in which the array, detector and fluid transport are miniaturized and integrated into a single unit will be the first attempt in the integration of a nanobiodevice.
Objectives:
The main objective of the Optonanogen proposal is to develop a portable biosensor microsystem able to detect single nucleotide variations in human genes.
The biosensor microsystem will consist of:
i) an array of 20 microcantilevers produced by standard silicon micromechanical technology,
ii) an optical detection system capable of measuring the cantilever movement (lasers and photodetectors).
The array of lasers (VSCELs) will be fabricated by Molecular Beam Epitaxy of semiconductor compounds. The array of photodetectors will be integrated with their corresponding amplifier and signal processing circuits, after design and fabrication of the CMOS circuitry and
iii) a polymer microfluidic system will be developed for reagents delivery to the biosensor.
Work description:
The work program, in order to obtain the biosensor microsystem, can be grouped as follows:
1. Fabrication of an array of 20 microcantilevers, which will be obtained using standard silicon micromachining technology. The cantilever dimensions will be choose in order to have a sensitive nanomechanical response and a small sensor area.
2. Development of a self-assembly chemistry which will allow to address DNA immobilization at the nanometer-scale level on one side of the cantilever array.
3. A polymer microfluidic header will be developed and integrated with the cantilever array. The microfluidic header will incorporate flow channels to allow the delivery of reagents to the cantilevers, and subsequent removal to waste.
4. Development of an optical detection subsystem, which must follow strictly the parallelism of the cantilevers and the microfluidics sub-units. A monolithic array of 20 VCSELs (Vertical Cavity Surface Emission Lasers) will be used as optical sources. These devices will be fabricated by molecular beam epitaxy.
5. For the detection of the displacement of the laser beam reflected off the cantilever backside, an array of 20 segmented photodetectors, integrated with their respective amplifier and signal processing circuits, will be designed and fabricated using IC silicon technology.
6. Final integration will be performed by incorporating the microfluidic header into a package that integrates the optical source, photodetectors and CMOS control electronics. Testing of the device will be performed before and after packaging.
Milestones:
1. Fabrication of chips of arrays of 20 cantilevers
2. Microfluidic header with common fluid path and integrated cantilever array
3. Optoelectronic subsystem for the biosensor microsystem (laser emitters, CMOSelectronics and photodetectors).
4. Robust method for coupling oligonucleotide probes to the microcantilever arraysurfaces
5. Final integrated biosensor microsystem with high performance.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs biocapteurs
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs capteurs optiques
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique traitement des signaux
- sciences naturelles sciences biologiques génétique nucléotide
- sciences naturelles sciences physiques optique physique des lasers
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
28006 MADRID
Espagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.