Cel "The ARMLIGhT project will design, manufacture, tune and validate an innovative and smart Electro-Mechanical Actuator for the study and validation of a future complete all-electric landing gear actuation system. ARMLIGhT actuator will be based on a modular and efficient approach that will integrate easily exchangeable electric and mechanical components with sensors and control strategies that will allow automatic and autonomous safety control.The ARMLIGhT Electro-Mechanical Actuator will include its dedicated Electronic Control Unit, a Built In Test equipment to detect potential failures and a disable device to guarantee compatibility with emergency actuation. Different configurations will be studied and evaluated to determine the optimum system architecture from a technical point of view. Volume, mass, electrical consumption, power to mass ratio, reliability, durability and safety are concepts that will drive the development.The ARMLIGhT system will be tested and validated at several stages: Virtual validation at model level and finally actual experimental validations of the complete system through both on-ground and in-flight test campaigns. These sequential and complementary validations will assure thus a reliable, safe and efficient performance of the prototype and will provide data for a deep concept evaluation.For this validation purpose, the ARMLIGhT project will also design, manufacture and tune a Test Rig for ARMLIGhT Electro-Mechanical Actuator validation. ARMLIGhT Test Rig will allow installation both in Copper Bird® and in the ATR (Avions de Transport Regional) passenger cabin. The test bench will also include its own control system, inertia load simulation of the Main Landing Gear involved weight and counter-load actuator with its hydraulic and electric power supply systems." Dziedzina nauki engineering and technologyelectrical engineering, electronic engineering, information engineeringelectrical engineeringelectric energyengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemsengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors Program(-y) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Temat(-y) JTI-CS-2011-2-GRA-03-005 - Design, development and manufacturing of EMA and Test Set-up for advanced Landing Gear System actuation Zaproszenie do składania wniosków SP1-JTI-CS-2011-02 Zobacz inne projekty w ramach tego zaproszenia System finansowania JTI-CS - Joint Technology Initiatives - Clean Sky Koordynator COMPANIA ESPANOLA DE SISTEMAS AERONAUTICOS SA Wkład UE € 174 659,00 Adres PASEO JOHN LENNON 4 GETAFE 28906 Madrid Hiszpania Zobacz na mapie Region Comunidad de Madrid Comunidad de Madrid Madrid Rodzaj działalności Private for-profit entities (excluding Higher or Secondary Education Establishments) Kontakt administracyjny Esmeralda Campillo (Ms.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych Uczestnicy (1) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko FUNDACION TECNALIA RESEARCH & INNOVATION Hiszpania Wkład UE € 299 033,75 Adres PARQUE CIENTIFICO Y TECNOLOGICO DE GIPUZKOA, PASEO MIKELETEGI 2 20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA) Zobacz na mapie Region Noreste País Vasco Gipuzkoa Rodzaj działalności Research Organisations Kontakt administracyjny Francisco Estensoro (Mr.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych