Objetivo It is proposed in this research programme to optimize the pylon shape of a Counter Rotating Open Rotor (CROR) propeller and its embedded flow control system, in order to reduce the noise emission through pylon wake attenuation, by means of advanced experimental methodology, such as 3CHD-PIV, adapted to in-flight tests.It is proposed to decompose the project into subtasks of increasing complexity. Each task falls within the scope of either ISAE or AAE. Thus, ISAE and AAE offer to join their different skills to elaborate a work-plan based on well-defined responsibilities.The subtasks are summarized below:1.Optimization of the flow control device for the 2D pylon. 2.Detailed design and manufacturing of the 2D type pylon wind tunnel model and its instrumentation.3.Low speed wind tunnel tests of the 2D pylon without open rotor, in a non vibrating environment, including parametric studies on the advanced flow control devices parameters and boundary layer transition effects.4.Comparison between experimental results and numerical prediction. Analysis of the results, physical understanding and recommendation for further improvement of the concept.5.Definition of vibration environment simulators (VES), in compliance with Airbus inputs from in flight tests.6.Detailed definition and manufacturing of VES applicable to the different PIV subsystems (cameras, laser, laser sheet generation devices) as implemented in the wind tunnel.7.Characterization of the limits of the vibration spectrum supported by the PIV subsystems, beyond which vibration-induced errors on PIV measurements impose corrections on raw data or on PIV subsystems attitude.8.Definition of correction methodology to correct PIV measurements, through raw data manipulation or PIV subsystems vibration attenuation, in order to recover a non disturbed PIV measurement.9.Validation of the correctiion methodology in wind tunnel by replicating subtask 3. Ámbito científico engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemsengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsoptical sensorsengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftnatural sciencesphysical sciencesclassical mechanicsfluid mechanicsfluid dynamicsnatural sciencesphysical sciencesopticslaser physics Programa(s) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Tema(s) JTI-CS-2011-2-SFWA-02-017 - Advanced Pylon Noise Reduction Design and characterisation through flight worthy PIV Convocatoria de propuestas SP1-JTI-CS-2011-02 Consulte otros proyectos de esta convocatoria Régimen de financiación JTI-CS - Joint Technology Initiatives - Clean Sky Coordinador INSTITUT SUPERIEUR DE L'AERONAUTIQUE ET DE L'ESPACE Aportación de la UE € 361 860,00 Dirección AVENUE EDOUARD BELIN 10 31055 Toulouse Francia Ver en el mapa Región Occitanie Midi-Pyrénées Haute-Garonne Tipo de actividad Higher or Secondary Education Establishments Contacto administrativo Michel Tello (Mr.) Enlaces Contactar con la organización Opens in new window Sitio web Opens in new window Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo AEROCONSEIL SAS Francia Aportación de la UE € 29 000,00 Dirección 7 BOULEVARD HENRI ZIEGLER 31700 Blagnac Ver en el mapa Región Occitanie Midi-Pyrénées Haute-Garonne Tipo de actividad Private for-profit entities (excluding Higher or Secondary Education Establishments) Contacto administrativo David Corceiro (Mr.) Enlaces Contactar con la organización Opens in new window Coste total Sin datos