CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.
Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .
Livrables
Following the collection of multiple samples of laminate pouches and pharma blister packs (PLA Lead), AIM will lead the full analysis of the samples, including type of adhesive and Aluminium and the analysis of laminate packaging - type of polymer films used, number and thickness of layers; and the analysis of pharma blister packaging - type of plastic, grade and quantity of aluminium used
Social impacts analysis (s’ouvre dans une nouvelle fenêtre)IPM2 to lead. A social impacts analysis of the materials, products and technologies will be conducted using social life cycle assessment (S-LCA), which will be performed in parallel to LCA-LCC (task 7.3).
Report on mechanical recycling and sorting methods (SOTA) (s’ouvre dans une nouvelle fenêtre)Packing waste will undergo varying degrees of shredding and grinding. AIM will take the lead to work out the best technique to ensure efficient delamination and selective polymer dissolution. MIK will take the lead to develop NIR technology for sorting of the multilayer packaging containing aluminium.
Report on preliminary market analysis, dissemination plans and KPI results. (s’ouvre dans une nouvelle fenêtre)Following the completion of WP 1 and the submission of D1.1 – 1.3, TWI will issue a report on the results obtained from the market analysis, feedback from industry and the targeted markets. A preliminary strategy on how our technology will be marketed will be provided including communication strategy on targeted end users. The report will also list all dissemination activities and KPI results
Safety and health risk management procedures (s’ouvre dans une nouvelle fenêtre)IPM2 to take the lead on safety and health risk management procedures
Report on the solvent recycling protocols (s’ouvre dans une nouvelle fenêtre)TWI will take the dissolved polymer blend produced by following the procedure in Task 4.4 and use aqueous two- phase extraction for the recovery of hydrophilic ILs after filtration of the precipitated polymer. If hydrophobic ILs are selected in WP4, then extraction with organic solvent will be carried out.
Report on the analysis of isolated polymers (s’ouvre dans une nouvelle fenêtre)SOL will lead the development of the analysis method to ensure high purity and usable physical form of the recovered polymers.
Summarised results of process validation trials (s’ouvre dans une nouvelle fenêtre)(AIM to lead) After full installation of the pilot reactor system, Sol-Rec2 processes for polymer dissolution and recovery will be trialled and validated using the different types of multi-layer packaging waste sorted and characterised in WP2 and WP3.
Bench marking LCA (s’ouvre dans une nouvelle fenêtre)IPM2 to take the lead on production of a bench marking LCA. Study based on the current state of the art industrial scale technologies
Industry requirements for sustainable multi-layer packaging (s’ouvre dans une nouvelle fenêtre)TWI will take the lead to engage with key manufacturers of multilayer packaging and seek to establish a sound understanding of their individual requirements for multi-layer packaging and the key barriers currently restricting recycling.
Report on KPIs (s’ouvre dans une nouvelle fenêtre)An initial report on the established indicators and results up to month 3 will be submitted
Quality of recovered polymers (s’ouvre dans une nouvelle fenêtre)(MIK to lead) An extensive programme of analysis will be carried out on all the isolated polymers to confirm the quality of the recovered materials and assess performance in comparison to virgin polymer.
Methodology for decontamination (s’ouvre dans une nouvelle fenêtre)MIK will take the lead to test various decontamination strategies. The decontamination efficiency of each approach will thus be evaluated.
Participation to the creation of a Cluster of plastic circularity oriented projects (s’ouvre dans une nouvelle fenêtre)IPM² will contact similar projects within the same calls on Plastic recycling issues and circularity, create a Cluster, use the tools offered by EC to prepare common logos, branding, documentation, visuals, participate to events in common stands, sharing experience and exchanges on similar tasks, make presentations of both project whereabouts and Cluster content.
IPM2 will take the lead to complete consumer surveys to provide a detailed assessment of public attitudes towards multi-layer packaging and recycling.
IPM2 will take the lead to organize workshops aimed at improving consumer attitudes and behaviours towards multi- layer packaging waste and recycling
Publications
Auteurs:
Asociacion de Investigacion de Materiales Plasticos y Conexas
Publié dans:
2022
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.15809374
Auteurs:
iPM²
Publié dans:
2022
Éditeur:
Solrec2
DOI:
10.5281/zenodo.15813796
Auteurs:
TWI
Publié dans:
2021
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.15813730
Auteurs:
Pascal Négré; Martin Goosey, Rod Kellner
Publié dans:
2021
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.15807550
Auteurs:
Asociacion de Investigacion de Materiales Plasticos y Conexas
Publié dans:
Numéro 2, 2022
Éditeur:
AIM
DOI:
10.5281/zenodo.15462860
Auteurs:
iPM²
Publié dans:
2022
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.15813920
Auteurs:
Solrec 2 team
Publié dans:
2023
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.7802147
Auteurs:
TWI
Publié dans:
2022
Éditeur:
Solrec2
DOI:
10.5281/zenodo.15813655
Auteurs:
PASCAL NEGRE, GEORGE THEODOSOPOULOS
Publié dans:
2022
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.7801743
Auteurs:
Négré, Pascal
Publié dans:
Numéro 1, 2021
Éditeur:
Solrec 2 project
DOI:
10.5281/zenodo.7886685
Auteurs:
AIMPLAS
Publié dans:
2022
Éditeur:
Solrec2
DOI:
10.5281/zenodo.15813685
Auteurs:
MIK
Publié dans:
2022
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.15813872
Auteurs:
TWI
Publié dans:
2022
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.15813952
Auteurs:
iPM²
Publié dans:
2022
Éditeur:
Solrec 2
DOI:
10.5281/zenodo.15813708
Auteurs:
Pr Andrew P. Abbott
Publié dans:
2022
Éditeur:
N/A
Auteurs:
Adamantini Loukodimou, Christopher Lovell, George Theodosopoulos, Kranthi Kumar Maniam, Shiladitya Paul
Publié dans:
Polymers, Numéro 16, 2024, Page(s) 2718, ISSN 2073-4360
Éditeur:
MDPI AG
DOI:
10.3390/polym16192718
Auteurs:
Adamantini Loukodimou, Christopher Lovell, Tianmiao Li, George Theodosopoulos, Kranthi Kumar Maniam, Shiladitya Paul
Publié dans:
Polymers, Numéro 16, 2024, Page(s) 2781, ISSN 2073-4360
Éditeur:
MDPI AG
DOI:
10.3390/polym16192781
Auteurs:
Tianmiao Li, George Theodosopoulos, Chris Lovell, Adamantini Loukodimou, Kranthi Kumar Maniam, Shiladitya Paul
Publié dans:
Polymers, Numéro 16, 2024, Page(s) 1670, ISSN 2073-4360
Éditeur:
MDPI AG
DOI:
10.3390/polym16121670
Auteurs:
Dr Berenika Syrek-Gerstenkorn, Prof Andy Abbott, & Dr Shiladitya Paul.
Publié dans:
2022
Éditeur:
N/A
DOI:
10.5281/zenodo.7875017
Auteurs:
Berenika Syrek-Gerstenkorn, Shiladitya Paul, Andrew P Abbott
Publié dans:
2022
Éditeur:
N/A
DOI:
10.5281/zenodo.7804891
Auteurs:
Berenika Syrek-Gerstenkorn, Andrew P Abbott, Shiladitya Paul
Publié dans:
Abstract: BOOK International Conference on Polymer Science and Engineering, 2022, Page(s) page 41 - 42
Éditeur:
"USG-United Scientific Group # 8105, Rasor Blvd - Suite #112, PLANO, TX 75024 Tel: +1-469-854-2280/81; Fax: +1-469-854-2278; Email: secretary@polymersmeeting.com ; Web: https://polymers.unitedscientificgroup.org/"
DOI:
10.5281/zenodo.7875336
Auteurs:
Pascal Négré
Publié dans:
Numéro 5, 2023
Éditeur:
N/A
DOI:
10.5281/zenodo.7801648
Droits de propriété intellectuelle
Numéro de demande/publication:
P
35603
Date:
2022-06-16
Demandeur(s):
FILIGRADE SUSTAINABLE WATERMARKS BV
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible