Simultaneous magnetic brain stimulation and measurement

Información del proyecto

STIMUSURE

Identificador del acuerdo de subvención: 101027633

DOI

10.3030/101027633

Proyecto cerrado

Fecha de la firma de la CE 14 Abril 2021

Fecha de inicio 18 Agosto 2021

Fecha de finalización 15 Febrero 2024

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 224 933,76

Aportación de la UE

€ 224 933,76

Coordinado por

THE UNIVERSITY OF BIRMINGHAM
United Kingdom

Periodic Reporting for period 1 - STIMUSURE (Simultaneous magnetic brain stimulation and measurement)

Período documentado: 2021-08-18 hasta 2023-08-17

Resumen del contexto y de los objetivos generales del proyecto

STIMUSURE aimed to develop the first magnetoencephalography (MEG) sensor compatible with simultaneous transcranial magnetic stimulation (TMS). TMS is the most precise non-invasive brain stimulation method, and MEG is the most precise non-invasive brain recording technique. Combining the two would allow for more precise functional brain imaging and enable development of tools that would help us understand the functional connectivity between brain regions.

STIMUSURE developed an optically pumped magnetometer (OPM) sensor prototype for MEG. The developed sensor could both withstand TMS pulses (peak magnetic field 10,000 times the Earth’s magnetic field) and record weak magnetic brain magnetic fields (typical magnetic field less than 1/100,000,000 times the Earth's magnetic field, or about one trillionth of the peak field during TMS).

The project, however, could not reach the aim of recording MEG signal from the human brain shortly after TMS pulses as the residual magnetic fields of the TMS coil could not be reduced by the required factor of 1,000,000,000,000 sufficiently fast, taking over 0.05 s rather than the desired below 0.01 s to suppress the residual field after each TMS pulse. To solve this technical limitation would require development of better TMS hardware. The project did, however, result in the first intrinsic optically pumped magnetic gradiometer for human use.

Trabajo realizado desde el comienzo del proyecto hasta el final del período abarcado por el informe y los principales resultados hasta la fecha

STIMUSURE developed a computational model for TMS in a magnetically shielded room and validated these models experimentally with a STIMUSURE-developed custom search-coil magnetometer.

STIMUSURE developed computational models to optimise both single OPM sensors and multi-sensor arrays for OPM-MEG. The first computational model was published in a journal article, and the results from the second model were presented in a conference talk in the WOPM 2023 meeting, respectively.

STIMUSURE developed an ultra-sensitive magnetic field sensor that can also tolerate extremely strong magnetic field pulses. STIMUSURE enabled this by the developing a method to design and build miniaturised self-shield magnetic field coils with a high shielding factor. Beyond these coils, STIMUSURE developed a compact electro-optomechanical assembly for an OPM-MEG sensor head, and then repurposed this design also to develop the first intrinsic optically pumped magnetic gradiometer for human biomagnetism. In this application, the self-shielded coils shielded the two halves of the gradiometer sensor from each other.

Avances que van más allá del estado de la técnica e impacto potencial esperado (incluida la repercusión socioeconómica y las implicaciones sociales más amplias del proyecto hasta la fecha)

STIMUSURE developed a method to design and build high-quality miniaturised self-shielded coils with very high shielding factors, enabling the development of the first intrinsic optically pumped magnetic gradiometer.

A computer-generated image to illustrate the internals of the optically pumped magnetic gradiometer.