Obiettivo The proposed project tackles a CfP from the JTI-GRA ITD. Is focuses on the experimental optimization of a regional aircraft configuration and a subsequent optimization of take-off/ landing configuration. The regional aircraft has a wing designed for natural laminar flow, fuselage-mounted engines and a T-tail. Open configurational questions that are addressed tackle wing-tip devices and their performance, engine positions as well as tail-plane position and settings. In order to account for the fuselage-mounted engine the model will include a working propulsion system designed to fit the real engines. This first test-phase focuses on the configurational questions, the second test-phase tackles the optimization of the HLD-devices by testing different configurations.Therefore apart from the modular aircraft configuration the different control surfaces, HLD devices used for assessing the landing-configuration and stability and control issues for the different configurations will include actuators to allow continuous setting and fast wind-tunnel tests. Pressure tubes, sensors and a balance system to measure engine thrust will be introduced into the aircraft model, too.The consortium for this proposal consists of 5 partners which were chosen according to their experience in different fields needed in this proposal. The consortium is well balanced, including SMEs, University and Industry.The work proposed in this proposal covers the total design, including solutions for actuators, propulsion system, the manufacturing of the model, its Ground-Vibration-Test and the Wind-Tunnel Test as well as the final subsequent modifications needed to operate the model in subsequent tests as required in the CfP. Thus the work is structured in four different work-package, dealing with Management, Design & Manufacturing, Tests and Final Modifications. Campo scientifico engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors Programma(i) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Argomento(i) JTI-CS-2012-2-GRA-05-007 - Development & optimization of advanced propulsion system installation through innovative complete A/C powered WT model Invito a presentare proposte SP1-JTI-CS-2012-02 Vedi altri progetti per questo bando Meccanismo di finanziamento JTI-CS - Joint Technology Initiatives - Clean Sky Coordinatore IBK-INNOVATION GMBH & CO. KG Contributo UE € 771 041,69 Indirizzo BUTENDEICHSWEG 2 21129 Hamburg Germania Mostra sulla mappa Regione Hamburg Hamburg Hamburg Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Contatto amministrativo Stephan Adden (Dr.) Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Costo totale Nessun dato Partecipanti (4) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto UNIVERSITY OF BRISTOL Regno Unito Contributo UE € 183 000,45 Indirizzo BEACON HOUSE QUEENS ROAD BS8 1QU Bristol Mostra sulla mappa Regione South West (England) Gloucestershire, Wiltshire and Bristol/Bath area Bristol, City of Tipo di attività Higher or Secondary Education Establishments Contatto amministrativo Julie Coombs (Mrs.) Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Costo totale Nessun dato REVOIND INDUSTRIALE Partecipazione conclusa Italia Contributo UE € 433 485,94 Indirizzo VIA CASALE MARCANGELI 13 67063 ORICOLA Mostra sulla mappa Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Contatto amministrativo Cesare Servadio (Mr.) Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Costo totale Nessun dato RUAG Schweiz AG Svizzera Contributo UE € 154 767,00 Indirizzo Seetalstrasse 175 6032 Emmen Mostra sulla mappa Regione Schweiz/Suisse/Svizzera Zentralschweiz Luzern Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Contatto amministrativo Andreas Hauser (Mr.) Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Costo totale Nessun dato EUROTECH DI MARIO AMOROSO SAS Italia Contributo UE € 329 430,00 Indirizzo Via Luigi Mercantini 23 IS 8 80125 Napoli Mostra sulla mappa Regione Sud Campania Napoli Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Contatto amministrativo Amoroso Francesco Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Costo totale Nessun dato