NEW DEPENDABLE ROLLING STOCK FOR A MORE SUSTAINABLE, INTELLIGENT AND COMFORTABLE RAIL TRANSPORT IN EUROPE

Resultado final

Analysis Homologation Process Technical Requirements Executive Summary

Executive summary of analysis of the current homologation process and of the technical requirements

Specification of desired capability of separation methods and track quality

"Indicates the precision required of a separation method for use in standardization, constraints on costs and scope of application (type of products, tracks, environments, etc). Includes results of a feasibility study into the introduction of ""recommended values"" in addition to limit values. "

Attractiveness and Comfort Review Report

Compilation of reports from various bodies on Attractiveness and Comfort

Evaluation methodology description

Report describing the methodology to use for the evaluation of the impact

State of the Art of Cost Assessment Methodologies

It reviews all the literature and substantive findings from previous research projects in Running Gear. Describes current technical as well as business models. Specifies architecture of the model, while taking into account the gaps and considering generalised country specific financing as well as technical aspects.

Set-up public website

This is for the set up, and going live, of a public website for the project. This will be continually updated with news and results throughout the life of the project.

Report on Communication and Dissemination activities

This report will detail the activities undertaken during the life of the project.

Final Report

Document defining all the open and closed points, aspects, conditions, interfaces and conclusions needed to start with sufficient information the SHIFT2RAIL project.

Validation against Bogie Types

Selects a representative running gear and performs sensitivity analysis

Architecture and Interface Definition for the Train to Ground Communication

This deliverable is intended to provide inputs for the IEC 61375-2-6 to close open points in the train to ground communication standard currently under development.

Assessment and validation of source separation methods

The various separation methods will be validated using the measurement data. Their potential accuracy and cost will be evaluated with reference to the specifications from Task 7.1. Recommendations for further development will be made (led by ISVR and BT).

Acoustic noise performances, targets, simulation methods, validation and recommendations

Compilation of current traction components noise performances, proposal of noise targets for traction components, state of the art of methodologies for the simulation of electromagnetic noise and cooling in traction systems, method used for simulation for each traction component, Simulation results validation with experimental data in every studied traction component. Strength and weakness of the methods including best practices and recommendations of use of the methods to be explored in SHIFT2RAIL

Characterisation of the Railway Environment for Radio Transmission

Document that defines a methodology for characterising the railway environment and provides the corresponding simulation models.

State of the Art and Recommendation of Suitable Technologies

Report on relevant radio technologies for TCMS from other fields including incipient or under development ones. This review will include information of existing, promising or under development technologies and architectures from other fields (e.g. aeronautics, industrial, telecommunications or signalling). The report will include an overview on hardware, protocols, frequencies, performance, simulators and tools, official institutions and bodies, standards and other research projects (c.f. Table 2 Part B - Projects linked with ROLL2RAIL)

Railway system level impact assessment

Final report with the evaluation of the impact achieved by the ROLL²RAILproject

Operator & Passenger Goals

An organised collection of operators and passenger functional requirements and expectations.

New Generation power semiconductor – Common specification for traction and market analysis, technology roadmap, and value cost prediction

Market survey addressing the special needs of rail industry. Develop common specification for rail traction and align roadmap together with relevant semiconductor industry.

Cost Model / Methodology

Describing the parts and their physical behaviour behind the key cost drivers

Journey Type Summary

A review of what is the train journey types and their frequencies, to focus the project on the future market needs.

Attractiveness & Comfort Features Report

Report on the features in interior train design that are important to the attractiveness and comfort as experienced by the passengers for their different journeys.

Validation against Infrastructure Types

Validates the Model for different vehicles across different country specific situations.

Top level specification from Operators & Technology Search results systems

Capture and compile requirements of operators, normative bodies and vehicle builders for future rail traction systems. Definition of know-how transfer frame work, short form of technology search results and transfer activity. Booklet of identified and compiled technology reports. Academia and Industry included

Energy Norms & Standards Application guide for KPI generation

The application guide gives straightforward recommendations on how to apply knowledge from Norms and Standards for KPI generation.

Car bodyshell specification

Technical specification to describe in detail all characteristics and minimum conditions to be met by the new composite material car bodyshell, as well as the definition of the composite material technological solutions for each car bodyshell subpart and the corresponding interfaces.

Final Report on Universal Cost model

Documents the results of the project, with the clear target to enable and prepare application of the universal cost model in the real world.

Specification of the Wireless TCMS

Document describing the requirements that should be fulfilled to have a wireless TCMS.

Dissemination Plan

This will detail the objectives and strategy for the dissemination of the project, as well as detailing the methods to be used for dissemination and communication.

Scenarios, and selection of most viable setup for Universal Cost model

Describes potential scenarios for a Universal cost model, and selects most viable setup for the model

Attractiveness & Comfort Features

List of the features that are relevant for attractiveness and comfort of a train interior and a weighting of their importance for different types of operation. Identifying knowledge gaps in the current way train interiors are defined.

Simulation of Selected Suitable Technologies

The content of this document lists the radio technologies and their comprehensive description that have been pre-selected through a number of simulation and studies, and which together with appropriate architectures may fulfil the specification.

Architecture for the Train and Consist Wireless Networks

Document which describes the proposed architecture of the wireless networks for the selected applications and which serves as input for the IEC 61375 standard series.

Performance compilation of rail traction system/equipment

Performance of current best in class traction system and equipment for baseline setting.

Summary of Existing Requirements for Interior Design

Chart of corresponding standards and norms with areas that they affect in interior design highlighted

Publicaciones

IK4-IKERLAN participa en un proyecto europeo que busca revolucionar el transporte ferroviario

Autores: IKERLAN
Publicado en: Edición 29.05.2015, 2015
Editor: IKERLAN

Europe’s future railways will generate energy

Autores: UNIFE
Publicado en: Horizon Magazine, Edición 27 April 2016, 2016
Editor: Horizon Magazine

Power Semiconductor Reliability for traction converter

Autores: SIEMENS, ALS, BT, CAF, DB
Publicado en: Workshop on Semiconductor Reliability, 2017
Editor: N.A.

Roll2Rail WP7 – Ein Verfahren zur Trennung der Geräuschanteile von Rad und Schiene

Autores: DB, SIEMENS, ISVR
Publicado en: Bahnakustik, Edición November 2016, 2016
Editor: Bahnakustik

Roll2Rail: A focus on running gear

Autores: BT, TALGO, UNIFE
Publicado en: Global Railway Review, 2017
Editor: Roll2Rail

Roll2Rail poster

Autores: UNIFE
Publicado en: TRA2016, 2016
Editor: TRA2016

Leistungshalbleiterinnovation zur Optimierung der Traktionssysteme unter Einbeziehung des Potentials von SiC Bauelementen

Autores: SIEMENS
Publicado en: 7. ETG-Fachtagung Bauelemente der Leistungselektronik und ihre Anwendungen in Bad Nauheim, 2017
Editor: N.a.

High-Speed Chase for Signals

Autores: DLR
Publicado en: DLR Magazin, Edición 151-152, 2017, Página(s) 28-29, ISSN 2190-0108
Editor: DLR

On a high-speed train at night – DLR researchers develop train-to-train communication

Autores: DLR
Publicado en: DLR website, press release, 19 April 2016, 2016
Editor: DLR

Roll2Rail – WP2: Wireless TCMS

Autores: CAF
Publicado en: ICT on TRAINS, 2017
Editor: ICT on TRAINS

Developing the rolling stock of the future

Autores: Eulalia Peris; Javier Goikoetxea
Publicado en: European Railway Review, Edición Volume 21, Edición 5, 2015, Página(s) 56-58, ISSN 1351-1599
Editor: Russell Publishing

Laying the foundations for a quieter railway

Autores: Eulalia Peris; Adam Mirza
Publicado en: European Railway Review, Edición Volume 21, Edición 6, 2015, Página(s) 42-44, ISSN 1351-1599
Editor: Russell Publishing

Sixth meeting of Roll2Rail Technical Management Team

Autores: Eduardo de la Guerra Ochoa
Publicado en: 2016
Editor: Fundación de los Ferrocarriles Españoles

Sexta reunión del equipo técnico de gestión del proyecto Roll2Rail

Autores: Eduardo de la Guerra Ochoa
Publicado en: Via Libre, 2016
Editor: Fundación de los Ferrocarriles Españoles

Roll2Rail – New methods for pass-by noise certification of trains

Autores: Gerald Schleinzer, Adam Mirza, Ulf Orrenius, David Thompson, Egoitz Iturritxa, Ines Lopez Arteaga, Antoine Malkoun, Matthias Stangl, Beatriz Martin Lopez
Publicado en: 2016
Editor: Slovenian Acoustical Society

Roll2Rail WP7 – Ein Verfahren zur Trennung der eräuschanteile von Rad und Schiene

Autores: Matthias Stangl
Publicado en: 2016
Editor: 4. Fachtagung Bahnakustik

Wheel Damage Prediction for Universal Cost Model Applications

Autores: BT, KTH, TRV
Publicado en: IAVSD, 2017, ISBN 9781-138035713
Editor: CRC Press

Separation of track contribution to pass-by noise by near-field array techniques

Autores: KTH, ISVR
Publicado en: International Congress on Acoustics, Buenos Aires, Edición 5-9 September 2016, 2016
Editor: International Congress on Acoustics

Roll2Rail WP4 Running Gear – Ansätze zur Reduktionder Kostendes Systems Bahn

Autores: BT, VIF, SIE, KTH
Publicado en: Moderne Schienenfahrzeuge, 2016
Editor: Moderne Schienenfahrzeuge

Roll2Rail: New Dependable Rolling Stock for a more Sustainable, Intelligent and Comfortable Rail Transport in Europe

Autores: CAF, UNIFE
Publicado en: Transportation Research Procedia, 2016, Página(s) 567-574
Editor: Elsevier

Universal Cost Model for innovative vehicle design

Autores: KTH
Publicado en: 19th Nordic Seminar on Railway Technology, 2016
Editor: 19th Nordic Seminar on Railway Technology

Wireless channel measurements and modeling for TCMS communications in metro environments

Autores: Inaki Val, Aitor Arriola, Pedro M Rodriguez, Ana Gonzalez-Plaza, David Alonso, Lei Zhang, Cesar Briso, Juan Moreno, Carlos Rodriguez Sanchez, Eneko Echeverria, Javier Goikoetxea
Publicado en: 2017 11th European Conference on Antennas and Propagation (EUCAP), 2017, Página(s) 108-112, ISBN 978-8-8907-0187-0
Editor: IEEE
DOI: 10.23919/EuCAP.2017.7928370

Track Damage Prediction For Universal Cost Model Applications

Autores: BT, KTH, TRV
Publicado en: IAVSD, 2017, ISBN 9781-138035713
Editor: CRC Press

Validation of LTE Backbone for Train Communications in Metro Environments

Autores: IKERLAN, CAF, THA, UNICONTROL
Publicado en: 2018 12th European Conference on Antennas and Propagation (EUCAP), 2018
Editor: EUCAP

Propagation measurements with regional train at 60 GHz for virtual coupling application

Autores: Kun Yang, Marion Berbineau, Jean-Pierre Ghys, Yann Cocheril, Divitha Seetharamdoo
Publicado en: 2017 11th European Conference on Antennas and Propagation (EUCAP), 2017, Página(s) 126-130, ISBN 978-8-8907-0187-0
Editor: IEEE
DOI: 10.23919/EuCAP.2017.7928494

Wide band propagation in train-to-train scenarios — Measurement campaign and first results

Autores: Paul Unterhuber, Stephan Sand, Mohammad Soliman, Benjamin Siebler, Andreas Lehner, Thomas Strang, Maurizio d'Atri, Fabrizio Tavano, Damini Gera
Publicado en: 2017 11th European Conference on Antennas and Propagation (EUCAP), 2017, Página(s) 3356-3360, ISBN 978-8-8907-0187-0
Editor: IEEE
DOI: 10.23919/EuCAP.2017.7928309

Energy prediction benchmark for Universal Cost Model calculations

Autores: KTH, STDV, CAF, SIE, ViF
Publicado en: Transport Research Arena (TRA) 2018, 2018
Editor: TRA2018

Channel Modelling and Wireless Propagation Challenges for mmWaves in Railways

Autores: DLR, IFSTTAR, IKERLAN Trenitalia, MDM
Publicado en: 38th Meeting of the Wireless World Research Forum, 2017
Editor: ReseearchGate

ITS-G5 Channel Model for High Speed Train-to-Train Communication

Autores: Paul Unterhuber, Mohammad Soliman, Andreas Lehner
Publicado en: Nets4Trains 2017, 2017, Página(s) 72-83
Editor: Springer International Publishing
DOI: 10.1007/978-3-319-56880-5_8

Towards 5G Infrastructure ¬ redundant Communications for Next Generation Railways

Autores: DLR
Publicado en: WWRF 39 Meeting, 2017
Editor: WWRF

Introducción de materiales ligeros en la construcción de partes estructurales en cajas ferroviarias: Roll2Rail e integración con otros Proyectos Europeos

Autores: Eduardo de la Guerra Ochoa
Publicado en: XXI Congreso Nacional de Ingeniería Mecánica, Edición no. 21. Bi-annual, 2016, Página(s) 770-777, ISBN 978-84-16024-37-7
Editor: Universidad Miguel Hernández de Elche

Separation of track contribution to pass-by noise by near-field array techniques

Autores: Elias Zea Luca Manzari Ines Lopez Arteaga Giacomo Squicciarini David Thompson
Publicado en: 22nd International Congress on Acoustics, Edición Every three years, 2016, Página(s) Page1-Page10
Editor: International Commission for Acoustics (ICA)

First analysis of inside Train communication with ITS-G5 measurement data

Autores: Mohammad Soliman, Paul Unterhuber, Damini Gera
Publicado en: 2016 International Symposium on Wireless Communication Systems (ISWCS), 2016, Página(s) 451-455, ISBN 978-1-5090-2061-4
Editor: IEEE
DOI: 10.1109/ISWCS.2016.7600946

Wave number–domain separation of rail contribution to pass-by noise

Autores: KTH, ISVR
Publicado en: Journal of Sound and Vibration, Edición Volume 409, 2017, Página(s) 24-42, ISSN 0022-460X
Editor: Academic Press

Assessment of measurement-based methods for separating wheel and track contributions to rolling noise

Autores: ISVR, KTH, ALS, CAF, DB ST, SIE, TALGO, SNCF, BT
Publicado en: Applied Acoustics, 2017, ISSN 0003-682X
Editor: Pergamon Press Ltd.

2.6 GHz Intra-Consist Channel Model for Train Control and Management Systems

Autores: Juan Moreno Garcia-Loygorri, Inaki Val, Aitor Arriola, Cesar Briso-Rodriguez
Publicado en: IEEE Access, Edición 5, 2017, Página(s) 23052-23059, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/ACCESS.2017.2759324

Roll2Rail: New Dependable Rolling Stock for a More Sustainable, Intelligent and Comfortable Rail Transport in Europe

Autores: Eulalia Peris, Javier Goikoetxea
Publicado en: Transportation Research Procedia, Edición 14, 2016, Página(s) 567-574, ISSN 2352-1465
Editor: Elsevier
DOI: 10.1016/j.trpro.2016.05.294

A Survey of Channel Measurements and Models for Current and Future Railway Communication Systems

Autores: Paul Unterhuber, Stephan Pfletschinger, Stephan Sand, Mohammad Soliman, Thomas Jost, Aitor Arriola, Iñaki Val, Cristina Cruces, Juan Moreno, Juan Pablo García-Nieto, Carlos Rodríguez, Marion Berbineau, Eneko Echeverría, Imanol Baz
Publicado en: Mobile Information Systems, Edición 2016, 2016, Página(s) 1-14, ISSN 1574-017X
Editor: IOS Press
DOI: 10.1155/2016/7308604

Virtuell Vernetzt ¬ Wie Züge durch Kommunikation zusammenfinden

Autores: DLR
Publicado en: Bahn-Manager Magazin, 2016, ISSN 2367-1998
Editor: Bahn-Manager Magazin

Direct train-to-train communications at 450MHz

Autores: DLR
Publicado en: IET Microwaves, Antennas & Propagation, 2017, ISSN 1751-8733
Editor: IET Institution of Engineering and Technology

Path Loss Models for Train-to-Train Communications in Typical High Speed Railway Environments

Autores: DLR
Publicado en: IET Microwaves, Antennas & Propagation, 2017, ISSN 1751-8733
Editor: IET Institution of Engineering and Technology

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar