Objectif
The overall objective of the REProMag project is to develop and validate an innovative, resource-efficient manufacturing route (SDS process) for Rare Earth magnets that allows for the economically efficient production of net-shape magnetic parts with complex structures and geometries, while being 100% waste-free along the whole manufacturing chain.
The new Shaping, Debinding and Sintering (SDS) process for Rare Earth magnets is an innovative automated manufacturing route to realise complex 3D- and multilayered parts; resulting in a significant increase in the material efficiency of at least 30% during manufacturing; while at the same time allowing additional geometrical features such as threads, cooling channels, small laminations/segments (e.g. to increase the efficiency of electrical motors) and structural optimisations such as lightweight-structures or the joint-free realisation. As part of the project, the possibility to produce hybrid parts such as an improved moving-coil transducer for headphones, loudspeakers and microphones will be evaluated.
The SDS process allows a new level of sustainability in production, as the energy efficiency along the whole manufacturing chain can be increased by more than 30% when compared to conventional production routes. Moreover, the used raw material is 100% recycled and can be again recycled in the same way at the end of the lifetime of the products. In short, the innovative REProMag SDS process has the potential to manufacture complex structures of high quality and productivity with minimum use of material and energy, resulting in significant economic advantages compared to conventional manufacturing.
The REProMag project is a highly innovative combination of applied research, technology development and integration, resulting in small-scale prototypes and a closely connected demonstration activity clearly showing the technical feasibility of the REProMag SDS processing route in a near to operational environment.
Champ scientifique
- engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecycling
- engineering and technologyenvironmental engineeringmining and mineral processing
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyelectrical engineering, electronic engineering, information engineeringinformation engineeringtelecommunicationsmobile phones
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
Programme(s)
Régime de financement
RIA - Research and Innovation actionCoordinateur
75228 ISPRINGEN
Allemagne
Voir sur la carte
Participants (14)
2700 Wiener Neustadt
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
01239 DRESDEN
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
8742 Obdach
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
1060 Wien
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
05100 MONTGENEVRE
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
80333 Munchen
Voir sur la carte
30900 Wedemark
Voir sur la carte
1040 Wien
Voir sur la carte
B15 2TT Birmingham
Voir sur la carte
8700 Leoben
Voir sur la carte
1000 Ljubljana
Voir sur la carte
TW11 0LW Middlesex
Voir sur la carte
Participation terminée
70599 Stuttgart
Voir sur la carte
70176 Stuttgart
Voir sur la carte