BIaxial STRETCHing of PLLA-WS2 nanocomposites FOR thinner and stronger BIOMEDical scaffolds

Información del proyecto

Bi-Stretch-4-Biomed

Identificador del acuerdo de subvención: 691238

DOI

10.3030/691238

Proyecto cerrado

Fecha de la firma de la CE 11 Noviembre 2015

Fecha de inicio 1 Febrero 2016

Fecha de finalización 31 Enero 2020

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 400 500,00

Aportación de la UE

€ 342 000,00

Coordinado por

AGENZIA NAZIONALE PER LE NUOVE TECNOLOGIE, L'ENERGIA E LO SVILUPPO ECONOMICO SOSTENIBILE
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Websites, patent fillings, videos etc. (2)

Publication of the website

Creation of the logo and the website of the Action

Publications, Patents

Dissemination of the achievements through scientific publications on peer reviewed journals, conference proceedings, patent filing

Publicaciones

Peer reviewed articles (6)

An investigation into the crystalline morphology transitions in poly-L- lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime

Autores: Kharmen Billimoria, Ellen L. Heeley, Nathan Parsons, Łukasz Figiel
Publicado en: European Polymer Journal, 2018, ISSN 0014-3057
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.eurpolymj.2018.01.031

Tube Expansion Deformation Enables In Situ Synchrotron X-ray Scattering Measurements during Extensional Flow-Induced Crystallization of Poly l-Lactide Near the Glass Transition

Autores: Karthik Ramachandran, Riccardo Miscioscia, Giovanni Filippo, Giuseppe Pandolfi, Tiziana Di Luccio, Julia Kornfield
Publicado en: Polymers, Edición 10/3, 2018, Página(s) 288, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym10030288

Characterization and modelling the mechanical behaviour of poly(l-lactic acid) for the manufacture of bioresorbable vascular scaffolds by stretch blow moulding

Autores: Huidong Wei, Shiyong Yan, Saurav Goel, Gary Menary
Publicado en: International Journal of Material Forming, 2019, ISSN 1960-6206
Editor: Springer-Verlag France
DOI: 10.1007/s12289-018-01463-2

Characterisation and constitutive modelling of biaxially stretched poly(L-lactic acid) sheet for application in coronary stents

Autores: R.W. Blair, N.J. Dunne, A.B. Lennon, G.H. Menary
Publicado en: Journal of the Mechanical Behavior of Biomedical Materials, Edición 97, 2019, Página(s) 346-354, ISSN 1751-6161
Editor: Elsevier BV
DOI: 10.1016/j.jmbbm.2019.05.039

Multi-objective optimisation of material properties and strut geometry for poly(L-lactic acid) coronary stents using response surface methodology

Autores: Ross W. Blair, Nicholas J. Dunne, Alex B. Lennon, Gary H. Menary
Publicado en: PLOS ONE, Edición 14/8, 2019, Página(s) e0218768, ISSN 1932-6203
Editor: Public Library of Science
DOI: 10.1371/journal.pone.0218768

Processing-property relationships of biaxially stretched poly(L-lactic acid) sheet for application in coronary stents

Autores: R.W. Blair, N.J. Dunne, A.B. Lennon, G.H. Menary
Publicado en: Journal of the Mechanical Behavior of Biomedical Materials, Edición 86, 2018, Página(s) 113-121, ISSN 1751-6161
Editor: Elsevier BV
DOI: 10.1016/j.jmbbm.2018.06.017

Conference proceedings (9)

Modelling Mechanical Behaviour of Amorphous Poly (L-Lactic Acid) under Biaxial Stretch at Temperatures above Glass Transition

Autores: H. Wei, G. Menary, S. Yan
Publicado en: Proceedings of SPE ANTEC 2017, 2017
Editor: SPE

Parametric Optimisation of a Stretch Blow Moulded Poly(L-lactic acid) Stent

Autores: Blair, R., Dunne, N., Lennon, A. and Menary, G
Publicado en: Bioengineering in Ireland 2018 Programme, 2018
Editor: Dublin City University

Parametric Study to Evaluate the Effect of Strut Geometry on PLLA Coronary Stent Recoil

Autores: Blair, R., Dunne, N., Lennon, A. and Menary, G
Publicado en: SIMULIA Science in the Age of Experience - Proceedings 2017, 2017, Página(s) 648–658
Editor: 3ds

Investigation on thermomechanical properties of poly (l-lactic acid) for the stretch blow moulding process of bioresorbable vascular scaffold

Autores: Huidong Wei, Gary Menary
Publicado en: AIP Conference Proceedings volume 1892, 2017, Página(s) 060002
Editor: Author(s)
DOI: 10.1063/1.5008065

Effect of Processing History on the Mechanical Behaviour of PLLA Stents

Autores: Blair, R., Dunne, N., Lennon, A. and Menary, G
Publicado en: Bioengineering in Ireland (23) Programme, 2017
Editor: Queen's University Belfast

Modelling Mechanical Behaviour of Poly(L-lactic acid) for the Manufacture of Bioresorbable Vascular Scaffolds

Autores: H. Wei, G. Menary
Publicado en: Proceedings of the 23rd Bioengineering in Ireland, 2017
Editor: Queen's University Belfast

Investigating Biomechanics of Bioresorbable Coronary Stents

Autores: Blair, R., Dunne, N., Lennon, A. and Menary, G
Publicado en: Bioengineering in Ireland (22) Book of Abstracts, 2016, Página(s) 161
Editor: NUIG

Finite element analysis for the manufacture of angioplasty balloons

Autores: H. Wei, G. Menary
Publicado en: Proceedings of the 22nd Bioengineering Conference in Ireland, 2016
Editor: NUIG

Effect of tungsten disulfide (WS2) nanotubes on structural, morphological and mechanical properties of poly(L-lactide) (PLLA) films

Autores: Loredana Tammaro, Tiziana Di Luccio, Carmela Borriello, Fausta Loffredo, Karthik Ramachandran, Fulvia Villani, Francesca Di Benedetto, Tara Schiller, Carla Minarini, Julia A. Kornfield
Publicado en: AIP Conference Proceedings volume 1981, 2018, Página(s) 020073
Editor: AIP Publishing
DOI: 10.1063/1.5045935

Other (12)

Impact of Tungsten Disulfide Nanotubes on the crystallization of poly (l-lactide) for thinner and stronger bioresorbable vascular scaffolds (BVS)

Autores: Tiziana Di Luccio, Karthik Ramachandran, Zach Zixuan Shao, Loredana Tammaro, Carmela Borriello, Fausta Loffredo, Fulvia Villani, Francesca Di Benedetto, Sandy Leung, Tony McNally, David Boyd, Julie Kornfield
Publicado en: Bulletin of the American Physical Society, 2018
Editor: American Physical Society

Investigating Nanocomposites od Polylactide (PLA) and Tungsten Disulfide (WS2) for Thinner, Radio- Opaque Bioresorbable Vascular Scaffolds (BVS)

Autores: E. E. Ruiz Bello, K. Ramachandran, T. Di Luccio and J. A. Kornfield
Publicado en: 2017
Editor: N/A

In situ Synchrotron X-ray Scattering during Extensional Flow Induced Crystallization of PLLA Enabled by Tube Expansion Deformation

Autores: T. Di Luccio, K. Ramachandran, R. Miscioscia, G. De Filippo, G. Pandolfi, and J. A. Kornfield
Publicado en: 3rd Joint AIC-SILS Conference - Rome, June 25-28, 2018, 2018
Editor: N/A

Enabling Thinner, Radio-Opaque Bioresorbable Vascular Scaffolds Using Biocompatible Nanocomposites of Poly (L-lactide) and Tungsten Disulfide Nanotubes

Autores: T. Di Luccio, K. Ramachandran, C. Borriello, F. Di Benedetto, T. L. Schiller, L. Tammaro, F. Villani, J. A. Kornfield
Publicado en: 2017 APS/CNM User Meeting, Argonne National Laboratories, May 8-11 (2017), 2017
Editor: N/A

PLLA-WS2 nanocomposites for Bioresorbable Vascular Scaffolds

Autores: Tiziana Di Luccio, Karthik Ramachandran, Julia A. Kornfield
Publicado en: 251st ACS National Meeting & Exposition, 2016
Editor: N/A

Multiplicity of morphologies in poly (l-lactide) bioresorbable vascular scaffolds

Autores: K. Ramachandran, J.A. Kornfield
Publicado en: The Society of Rheology, 2017
Editor: N/A

Impact of Tungsten Disulfide Nanotubes on the crystallization of poly (l-lactide) for thinner and stronger bioresorbable vascular scaffolds (BVS)

Autores: T. Di Luccio, K. Ramachandran, Z.Z. Shao, L. Tammaro, C. Borriello, F. Loffredo, F. Villani, F. Di Benedetto, S. Leung, T. McNally, D. Boyd, J.A. Kornfield
Publicado en: American Physical Society, 2018, 2018
Editor: N/A

Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding

Autores: H. Wei, S. Yan, G. Menary, F. Buchanan
Publicado en: IMIOT and ICSEE, 2018
Editor: N/A

Nanocomposites of Poly (L-lactide) and Tungsten Disulfide for new generation Bioresorbable Vascular Scaffolds

Autores: T. Di Luccio, K. Ramachandran, Z. Shao, J.A. Kornfield
Publicado en: UCLA Bioscience Innovation Day, 2019
Editor: N/A

In situ Synchrotron X-ray Scattering during Extensional Flow Induced Crystallization of PLLA Enabled by Tube Expansion Deformation

Autores: K. Ramachandran, T. Di Luccio, R. Miscioscia, G. De Filippo, G. Pandolfi, J.A. Kornfield
Publicado en: The Society of Rheology 91st Annual Meeting, 2019
Editor: N/A

Effect of tungsten disulfide nanotubes (WSNTs) on flow-induced crystallization of polylactide (PLA) for thinner and stronger bioresorbable vascular scaffolds

Autores: K. Ramachandran, Z. Shao, T. Di Luccio, B. Shen, E.E. Ruiz Bello, L. Tammaro, F. Villani, F. Loffredo, C. Borriello, F. Di Benedetto, J.A. Kornfield
Publicado en: The Society of Rheology 91st Annual Meeting, 2019
Editor: N/A

Flow induced crystallization of PLLA and PLLA-WS2 nanocomposites

Autores: T. Di Luccio, K. Ramachandran, Z. Shao, J. A. Kornfield, R. Miscioscia, G. De Filippo, G. Pandolfi, L. Tammaro, C. Borriello, F. Loffredo, F. Villani, F. Di Benedetto
Publicado en: Flow Induced Crystallization Workshop, 2020
Editor: N/A

Book chapters (1)

Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding

Autores: Huidong Wei, Gary Menary, Shiyong Yan, Fraser Buchanan
Publicado en: Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Chongqing, China, September 21-23, 2018, Proceedings, Part I, Edición 923, 2018, Página(s) 228-238, ISBN 978-981-13-2395-9
Editor: Springer Singapore
DOI: 10.1007/978-981-13-2396-6_21