Deliverables Documents, reports (14) Stability, biocompatibility and resistivity to aggressive environment of the developed dental implants with modified surface Stability biocompatibility and resistivity to aggressive environment of the developed dental implants with modified surface will be evaluated Recommendation for in-vivo application of implants with different surface treatment Recommendation for invivo application of implants with different surface treatment will be prepared Recommendation for development of dental implants with optimal mechanical properties Validation and optimization of parameters will be performed Trained 35 ESR, 37 ER and 17 management staff members 35 ESR 37 ER and 17 management staff members will be trained Methodology of ZrTiNb-based metal alloy preparation Methodology of ZrTiNb-based metal alloy preparation with tuned properties will be reported. Nanostructured sol gel HA, ZnO, TiO2 and ZnO-HA dental coatings with tailored structure and mechanical properties Nanostructured sol gel HA, ZnO, TiO2 and ZnO-HA dental coatings with tailored structure and mechanical properties will be developed Results of bacteriological testing and recommendation for in-vivo and clinical application Results of bacteriological testing and recommendation for invivo and clinical application will be published Results of dental implant biocompatibility and toxicity Results of dental implant biocompatibility and toxicity will be obtained Prepared drafts of publications and conference theses, 40 scientific seminars Drafts of publications and conference theses will be preparedForty scientific seminars will be organized 3D scaffolds formed by electrospinning and laser ablation methods 3D scaffolds formed by electrospinning and laser ablation methods will be formed over the metal alloy implants Influence of surface type and topography on osteoblast and fibroblast attachment and proliferation and MSCs differentiation Influence of surface type and topography on osteoblast and fibroblast attachment and proliferation and MSCs differentiation will be revealed Results of early and late postoperative periods after the animal implantation and recommendation for clinical application Results of early and late postoperative periods after the animal implantation and recommendation for clinical application will be summarized Results of alloy’s mechanical testing, crystal structure, phase composition Fundamental parameters of alloys will be calculated Prototype of dental implant with advanced mechanical properties Prototype of dental implant with advanced mechanical properties will be developed Websites, patent fillings, videos etc. (1) Developed web page of the project The web page of the project will be developed and moderated Publications Peer reviewed articles (15) Hemostatic performance and biocompatibility of chitosan-based agents in experimental parenchymal bleeding Author(s): Volodymyr Deineka; Oksana Sulaieva; N. Pernakov; Julia Radwan-Pragłowska; L. Janus; Viktoriia Korniienko; Ye. Husak; A. Yanovska; Iryna Liubchak; A. Yusupova; Marek Piątkowski; Alona Zlatska; Maksym Pogorielov Published in: Materials Science and Engineering: C, Issue 12, 2021, ISSN 0928-4931 Publisher: Elsevier BV DOI: 10.1016/j.msec.2020.111740 In Vitro Biological Characterization of Silver-Doped Anodic Oxide Coating on Titanium. Author(s): Oleshko, Oleksandr Mykolaiovych; Liubchak, Iryna Volodymyrivna; Husak, Yevheniia Volodymyrivna; Корнiєнко, Вiкторiя Володимирiвна; Korniienko, Viktoriia Volodymyrivna; Yusupova, Aziza Farkhodivna; Oleshko, Tetiana Bohdanivna; Banasiuk, R.; Szkodo, M.; Matros-Taranets, I.; Kazek-Kęsik, A.; Simka, W.; Pohorielov, Maksym Volodymyrovych Published in: Materials, Issue 16, 2020, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma13194359 Complementary Effect of Non-Persistent Silver Nano-Architectures and Chlorhexidine on Infected Wound Healing Author(s): Pernakov, Mykola Stanislavovych; Ermini, M.L.; Sulaieva, O.; Cassano, D.; Santucci, M.; Husak, Yevheniia Volodymyrivna; Корнiєнко, Вiкторiя Володимирiвна; Korniienko, Viktoriia Volodymyrivna; Giannone, G.; Yusupova, Aziza Farkhodivna; Liubchak, Iryna Volodymyrivna; Hristova, M.T.; Savchenko, A.; Holubnycha, Viktoriia Mykolaivna; Voliani, V.; Pohorielov, Maksym Volodymyrov Published in: Biomedicines, Issue 11, 2021, ISSN 2227-9059 Publisher: MDPI DOI: 10.3390/biomedicines9091215 Hemostatic and Tissue Regeneration Performance of Novel Electrospun Chitosan-Based Materials Author(s): Deineka, Volodymyr Mykolaiovych; Sulaieva, O.; Pernakov, Mykola Stanislavovych; Корнiєнко, Вiкторiя Володимирiвна; Korniienko, Viktoriia Volodymyrivna; Husak, Yevheniia Volodymyrivna; Yanovska, Hanna Oleksandrivna; Yusupova, Aziza Farkhodivna; Tkachenko, Yuliia Anatoliivna; Kalinkevich, O.; Zlatska, A.; Pohorielov, Maksym Volodymyrovych Published in: Biomedicines, Issue 1, 2021, ISSN 2227-9059 Publisher: MDPI DOI: 10.3390/biomedicines9060588 Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions. Author(s): Yevheniia Husak; Joanna Michalska; Oleksandr Oleshko; Viktoriia Korniienko; Karlis Grundsteins; Bohdan Dryhval; Sahin Altundal; Sahin Altundal; Oleg Mishchenko; Roman Viter; Maksym Pogorielov; Wojciech Simka Published in: Molecules, Vol 26, Iss 2094, p 2094 (2021), Issue 6, 2021, ISSN 1420-3049 Publisher: Multidisciplinary Digital Publishing Institute (MDPI) DOI: 10.3390/molecules26072094 Chitosan-Based Bioactive Hemostatic Agents with Antibacterial Properties—Synthesis and Characterization Author(s): Julia Radwan-Pragłowska; Marek Piątkowski; Volodymyr Deineka; Łukasz Janus; Viktoriia Korniienko; E. V. Husak; Viktoria Holubnycha; Iryna Liubchak; Vyacheslav Zhurba; Aleksandra Sierakowska; Maksym Pogorielov; Dariusz Bogdal Published in: Molecules, Vol 24, Iss 14, p 2629 (2019), Issue 17, 2019, ISSN 1420-3049 Publisher: Multidisciplinary Digital Publishing Institute (MDPI) DOI: 10.3390/molecules24142629 Degradation and In Vivo Response of Hydroxyapatite-Coated Mg Alloy Author(s): Yevheniia Husak, Oleksandr Solodovnyk, Anna Yanovska, Yevhenii Kozik, Iryna Liubchak, Viktoriia Ivchenko, Oleg Mishchenko, Yevhen Zinchenko, Vladimir Kuznetsov, Maksym Pogorielov Published in: Coatings, Issue 8/11, 2018, Page(s) 375, ISSN 2079-6412 Publisher: MDPI DOI: 10.3390/coatings8110375 Chemical and Structural Characterization of Sandlasted Surface of Dental Implant using ZrO2 Particle with Different Shape Author(s): Oleg Mishchenko, Vira Filatova, Mykhaylo Vasylyev, Volodymyr Deineka, Maksym Pogorielov Published in: Coatings, Issue 9/4, 2019, Page(s) 223, ISSN 2079-6412 Publisher: MDPI DOI: 10.3390/coatings9040223 Cell and tissue response to nanotextured Ti6Al4V and Zr implants using high-speed femtosecond laser-induced periodic surface structures Author(s): Iaroslav Gnilitskyi, Maksym Pogorielov, Roman Viter, Ana Maria Ferraria, Ana Patrícia Carapeto, Olexandr Oleshko, Leonardo Orazi, Oleg Mishchenko Published in: Nanomedicine: Nanotechnology, Biology and Medicine, 2019, Page(s) 102036, ISSN 1549-9634 Publisher: Elsevier BV DOI: 10.1016/j.nano.2019.102036 Ag Nanoparticle-Decorated Oxide Coatings Formed via Plasma Electrolytic Oxidation on ZrNb Alloy Author(s): Oleksandr Oleshko, Volodymyr Deineka V, Yevgeniia Husak, Viktoriia Korniienko, Oleg Mishchenko, Viktoriia Holubnycha, Marcin Pisarek, Joanna Michalska, Alicja Kazek-Kęsik, Agata Jakóbik-Kolon, Wojciech Simka, Maksym Pogorielov Published in: Materials, Issue 12/22, 2019, Page(s) 3742, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma12223742 New Zr-Ti-Nb Alloy for Medical Application: Development, Chemical and Mechanical Properties, and Biocompatibility Author(s): Oleg Mishchenko, Oleksandr Ovchynnykov, Oleksii Kapustian, Maksym Pogorielov Published in: Materials, Issue 13/6, 2020, Page(s) 1306, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma13061306 Development, characterization and antimicrobial properties of silver nanoparticles loaded chitosan-alginate sponges for biomedical application Author(s): A. Yanovska; Ye. Husak; Viktoriia Korniienko; Viktoriia Mykolaivna Holubnycha; Oleg Mishchenko; R. Banasiuk; Julia Radwan-Pragłowska; Marek Piątkowski; Łukasz Janus; Maksym Pogorielov Published in: Journal of Materials Research, Issue 7, 2021, ISSN 2044-5326 Publisher: Springer Science+Business Media DOI: 10.1557/s43578-021-00358-4 MXenes—A New Class of Two-Dimensional Materials: Structure, Properties and Potential Applications Author(s): Maksym Pogorielov; Kateryna Smyrnova; Sergiy Kyrylenko; Oleksiy Gogotsi; Veronika Zahorodna; Alexander Pogrebnjak Published in: Nanomaterials, Vol 11, Iss 3412, p 3412 (2021), Issue 25, 2021, ISSN 2079-4991 Publisher: MDPI DOI: 10.3390/nano11123412 Formation of a Bacteriostatic Surface on ZrNb Alloy via Anodization in a Solution Containing Cu Nanoparticles Author(s): Корнiєнко, Вiкторiя Володимирiвна; Korniienko, Viktoriia Volodymyrivna; Oleshko, Oleksandr Mykolaiovych; Husak, Yevheniia Volodymyrivna; Deineka, Volodymyr Mykolaiovych; Holubnycha, Viktoriia Mykolaivna; Mishchenko, O.; Kazek-Kęsik, A.; Jakobik-Kolon, A.; Pshenychnyi, Roman Mykolaiovych; Leśniak-Ziółkowska, K.; Kalinkevich, O.; Kalinkevich, A.; Pisarek, M.; Simka, W.; Published in: Materials, Issue 2, 2020, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma13183913 Biocompatibility and Antibacterial Properties of ZnO-Incorporated Anodic Oxide Coatings on TiZrNb Alloy. Author(s): Oleksandr Oleshko; Yevheniia Husak; Viktoriia Korniienko; Roman Pshenychnyi; Yuliia Varava; Oksana Kalinkevich; Marcin Pisarek; Karlis Grundstains; Oksana Pogorielova; Oleg Mishchenko; Wojciech Simka; Roman Viter; Roman Viter; Maksym Pogorielov Published in: Nanomaterials, Issue 14, 2020, ISSN 2079-4991 Publisher: MDPI DOI: 10.3390/nano10122401 Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available
