July 2018, Data management plan preparation and integration into Seco Tools’ environment.
August 2018, Purchase of licenses for Optimisation toolbox (MATLAB), Livelink to MATLAB (Comsol Multiphysics), Heat transfer module (Comsol Multiphysics); Design and manufacturing of samples for thermal resistance experiments on LFA machine (This is needed to complete Satellite module “Thermal resistance”, performed within WP1 of the work plan).
September - October 2018, Design and manufacturing of thermocouples equipped tool holders for longitudinal turning for TPUN and TNMA geometries (Satellite module “Temperature distribution” (SM1), WP1 of the work plan).
November - December 2018, Experiment plan implementation. This plan included two types of insert geometries (TNMA, TPUN) as well as two sorts of inserts with different percentage of cobalt.
January - February 2019, Establishing of FE models for manufactured thermocouples equipped tools. Testing and sensitivity analysis. (Action performed within WP2). Tool temperature distribution modelling on the base of experimental data previously collected. Training on operation with IR camera available at Seco Tools. Machine Learning course attending (Stanford online).
March 2019, Experiments preparation on Cooling Strategies (SM 4, WP2 of Work plan) in Lund University (purchase of nozzles for cooling media, experimental setup design).
April 2019 - May 2019, Lund University secondment. This activity covers two points: (i) Operation with LFA apparatus, (ii) Cooling strategies investigations. The first one is needed to create reliable database with temperature dependent properties for different sorts of cemented carbide and thermal resistances existing in tool assemblies. The second one is for implementation of the Satellite module “Cooling investigations” (WP2). The satellite modules “Thermal resistance” (WP1), “Temperature distribution” (WP1) and “Cooling investigations” (WP2) were completed.
June 2019, Scientific paper preparation and submission to International Journal of Machine Tool and Manufacture.
July 2019, Vacation
August 2019, Revision of the paper following the reviewers’ comments. Because colleagues from Lund University were unable to manufacture a tool with printed thermocouples as was planned by September 2019, the plan was corrected. The correction of the plan consisted of registering temperatures in the cutting zone with the help of a high-speed infrared camera and a specially adapted toolholder instead of printed thermocouples.
September 2019, New design of adapted toolholder with resistive thermal sensor and WiFi interface.
October 2019, Manufacturing of adapted toolholder with resistive thermal sensor and WiFi interface
November 2019, FE model correction for adapted toolholder with resistive thermal sensor and WiFi interface. Testing and sensitivity analysis.
December 2019, Preparation of inserts with different types of coatings. It was done within Satellite module “Coating investigation” (WP2).
January 2020, Experiments for coating investigations with the help of new toolholder equipped by resistive thermal sensor and IR camera. Implementation of Satellite module “Smart sensor” (WP1) and Satellite module “Coating investigation” (WP2).
February - March 2020, Experimental data processing. The satellite modules “Smart sensor” and “Coating investigation” were completed.
April 2020, A method for determining an average temperature at a cutting edge of a cutting tool during machining process is proposed. The method includes the specially designed toolholder equipped with thermal sensors and original software.
May 2020, June 2020, Result summary and patent preparation because the method was considered as patentable.
The results and their exploitation and dissemination.
September 2018, Public presentation of the project to the whole R&D department as Seco Tools (Fagersta).
October 2018, Public presentation in Seco office in Chalmers University (Gothenburg).
December 2018, Internal presentation at Seco (Fagersta).
October 2019, Presentation of the project for Prof. Helmi Attia (Seco research collaborator from McGill University, Canada) and Rami El Sayed (Seco Tools, R&D Coating and Surfaces) (Stockholm).
March 2019, Internal seminar at Seco (Fagersta).
September 2019, Scientific paper published in International Journal of Machine Tool and Manufacture (impact factor 8.019) (
https://doi.org/10.1016/j.ijmachtools.2019.103468(se abrirá en una nueva ventana)).
April 2020, Internal Webinar showcasing the results from the project to Seco group global R&D.
June 2020, WEB-presentations for McGill University (Canada)
