An Open Innovation Ecosystem for upscaling production processes of lightweight metal alloys composites

Informations projet

LightMe

N° de convention de subvention: 814552

DOI

10.3030/814552

Projet clôturé

Date de signature de la CE 12 Decembre 2018

Date de début 1 Janvier 2019

Date de fin 30 Juin 2023

Financé au titre de

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials

Coût total

€ 13 009 598,75

Contribution de l’UE

€ 11 057 990,38

Coordonné par

POLITECNICO DI MILANO
Italy

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (6)

Report on training activities and training material

Detailed report concerning the training activities, assessment of the added value of these training courses and presentation of the final training materials

Statute of the NPO

The Statute of the Legal Entity that will act as the SEP of the Ecosystem

Report on Ecosystem's liaison with standardization bodies

Written report on any possible recommendations of the LightMe consortium towards standardization bodies, minutes of meetings and actions taken

Final report on the organization structure of the Ecosystem

Written report on the final legal and administrative structure of the Ecosystem, finalization concerning the sources of initial funding

Report on Ecosystem's clustering activities

Written report containing the minutes of meetings held during the clustering activities, actions taken and feedback from stakeholders

Report on activities promoting nanosafety aspects

Written report containing the activities undertaken during the project concerning nanosafety aspects, including minutes of meeting with corresponding clusters and initiatives

Websites, patent fillings, videos etc. (2)

Project Web-portal, Blog and Social Media Groups

Launch of the Project website dedicated to dissemination and communication of project results

Delivery of training activities schedule and contents

Report on the scheduled training activities and preliminary description of the content of the training courses

Publications

Peer reviewed articles (4)

Lessons Learnt from Engineering Science Projects Participating in the Horizon 2020 Open Research Data Pilot

Auteurs: Timothy Austin, Kyriaki Bei, Theodoros Efthymiadis, Elias P. Koumoulos
Publié dans: Data, 2021, ISSN 2306-5729
Éditeur: MDPI
DOI: 10.3390/data6090096

Comparative Life Cycle Assessment of Green Sand Casting and Low Pressure Die Casting for the production of self-cleaning AlMg3-TiO2 Metal Matrix Composite

Auteurs: Mario Santiago-Herrera, Jesús Ibáñez, Julieta Díez-Hernández, Juan Antonio Tamayo-Ramos, Thomas Pabel, Christian Kneissl, J.M. Alegre, Sonia Martel-Martín, Rocío Barros
Publié dans: Ecological Indicators, 2022, ISSN 1470-160X
Éditeur: Elsevier BV
DOI: 10.1016/j.ecolind.2022.109442

Comparative Life Cycle Assessment and Cost Analysis of the Production of Ti6Al4V-TiC Metal–Matrix Composite Powder by High-Energy Ball Milling and Ti6Al4V Powder by Gas Atomization

Auteurs: Mario Santiago-Herrera, Jesús Ibáñez, Marco De Pamphilis, Jesús Manuel Alegre, Juan Antonio Tamayo-Ramos, Sonia Martel-Martín, Rocío Barros
Publié dans: Sustainability, 2023, ISSN 2078-2489
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/su15086649

Processing of SiC nano-reinforced AlSi9Cu3 composites by stir mixing, ultrasonication and high pressure die casting

Auteurs: Guangyu Liu; Mahfuz Karim; Shihao Wang; Dmitry Eskin; Brian McKay
Publié dans: Crossref, Numéro 5, 2022, ISSN 2238-7854
Éditeur: Elsevier Editora Ltda
DOI: 10.1016/j.jmrt.2022.03.132

Conference proceedings (2)

Combination of SPS and KOBO extrusion as effective route of manufacturing AA7075-nSiC composites

Auteurs: Dariusz GARBIEC, Volf LESHCHYNSKY, Rafał RUBACH, Alexander M. LAPTEV, Marek ŁAGODA, Marco DE PAMPHILIS, Alberto COELLA, Paolo MATTEAZZI
Publié dans: GFDM-FACE-2021, Numéro GFDM-FACE, 2021
Éditeur: GFDM-FACE-2021

Manufacturing of Nano-Reinforced Aluminium Composites By a Combination of Stir Mixing, Ultrasonic Processing, and High-Pressure Die Casting

Auteurs: Guangyu Liu, Mahfuz Karim, Dmitry Eskin & Brian McKay
Publié dans: The Minerals, Metals & Materials Series book series (MMMS);, 2022
Éditeur: Springer, Cham
DOI: 10.1007/978-3-030-92567-3_9

Other (1)

LightMe - Application of Lightweight materials in Additive Manufacturing

Auteurs: P. Catarino, R. Bola
Publié dans: IIW2021 conference, 2021
Éditeur: abstract for the IIW2021 conference