An Open Innovation Ecosystem for upscaling production processes of lightweight metal alloys composites

Projektinformationen

LightMe

ID Finanzhilfevereinbarung: 814552

DOI

10.3030/814552

Projekt abgeschlossen

EK-Unterschriftsdatum 12 Dezember 2018

Startdatum 1 Januar 2019

Enddatum 30 Juni 2023

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials

Gesamtkosten

€ 13 009 598,75

EU-Beitrag

€ 11 057 990,38

Koordiniert durch

POLITECNICO DI MILANO
Italy

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (6)

Report on training activities and training material

Detailed report concerning the training activities, assessment of the added value of these training courses and presentation of the final training materials

Statute of the NPO

The Statute of the Legal Entity that will act as the SEP of the Ecosystem

Report on Ecosystem's liaison with standardization bodies

Written report on any possible recommendations of the LightMe consortium towards standardization bodies, minutes of meetings and actions taken

Final report on the organization structure of the Ecosystem

Written report on the final legal and administrative structure of the Ecosystem, finalization concerning the sources of initial funding

Report on Ecosystem's clustering activities

Written report containing the minutes of meetings held during the clustering activities, actions taken and feedback from stakeholders

Report on activities promoting nanosafety aspects

Written report containing the activities undertaken during the project concerning nanosafety aspects, including minutes of meeting with corresponding clusters and initiatives

Websites, patent fillings, videos etc. (2)

Project Web-portal, Blog and Social Media Groups

Launch of the Project website dedicated to dissemination and communication of project results

Delivery of training activities schedule and contents

Report on the scheduled training activities and preliminary description of the content of the training courses

Veröffentlichungen

Peer reviewed articles (4)

Lessons Learnt from Engineering Science Projects Participating in the Horizon 2020 Open Research Data Pilot

Autoren: Timothy Austin, Kyriaki Bei, Theodoros Efthymiadis, Elias P. Koumoulos
Veröffentlicht in: Data, 2021, ISSN 2306-5729
Herausgeber: MDPI
DOI: 10.3390/data6090096

Comparative Life Cycle Assessment of Green Sand Casting and Low Pressure Die Casting for the production of self-cleaning AlMg3-TiO2 Metal Matrix Composite

Autoren: Mario Santiago-Herrera, Jesús Ibáñez, Julieta Díez-Hernández, Juan Antonio Tamayo-Ramos, Thomas Pabel, Christian Kneissl, J.M. Alegre, Sonia Martel-Martín, Rocío Barros
Veröffentlicht in: Ecological Indicators, 2022, ISSN 1470-160X
Herausgeber: Elsevier BV
DOI: 10.1016/j.ecolind.2022.109442

Comparative Life Cycle Assessment and Cost Analysis of the Production of Ti6Al4V-TiC Metal–Matrix Composite Powder by High-Energy Ball Milling and Ti6Al4V Powder by Gas Atomization

Autoren: Mario Santiago-Herrera, Jesús Ibáñez, Marco De Pamphilis, Jesús Manuel Alegre, Juan Antonio Tamayo-Ramos, Sonia Martel-Martín, Rocío Barros
Veröffentlicht in: Sustainability, 2023, ISSN 2078-2489
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/su15086649

Processing of SiC nano-reinforced AlSi9Cu3 composites by stir mixing, ultrasonication and high pressure die casting

Autoren: Guangyu Liu; Mahfuz Karim; Shihao Wang; Dmitry Eskin; Brian McKay
Veröffentlicht in: Crossref, Ausgabe 5, 2022, ISSN 2238-7854
Herausgeber: Elsevier Editora Ltda
DOI: 10.1016/j.jmrt.2022.03.132

Conference proceedings (2)

Combination of SPS and KOBO extrusion as effective route of manufacturing AA7075-nSiC composites

Autoren: Dariusz GARBIEC, Volf LESHCHYNSKY, Rafał RUBACH, Alexander M. LAPTEV, Marek ŁAGODA, Marco DE PAMPHILIS, Alberto COELLA, Paolo MATTEAZZI
Veröffentlicht in: GFDM-FACE-2021, Ausgabe GFDM-FACE, 2021
Herausgeber: GFDM-FACE-2021

Manufacturing of Nano-Reinforced Aluminium Composites By a Combination of Stir Mixing, Ultrasonic Processing, and High-Pressure Die Casting

Autoren: Guangyu Liu, Mahfuz Karim, Dmitry Eskin & Brian McKay
Veröffentlicht in: The Minerals, Metals & Materials Series book series (MMMS);, 2022
Herausgeber: Springer, Cham
DOI: 10.1007/978-3-030-92567-3_9

Other (1)

LightMe - Application of Lightweight materials in Additive Manufacturing

Autoren: P. Catarino, R. Bola
Veröffentlicht in: IIW2021 conference, 2021
Herausgeber: abstract for the IIW2021 conference