Objetivo The project aimed at manufacturing a high-speed centrifuge for separation of water-oil mixture. This equipment will be of reduced size and wright compared with other systems of the same output. The oil content of discharged water will be 10 ppm.Low flow rate tests have confirmed the figures predicted for oil-water separation. First tests of the industrial prototype have been satisfactory. The bowl reached its rated speed without any trouble.Progress testing is to be started.The centrifuge comprises a bowl mounted on an axial shaft bearing a disk stack. A wiper screw conveyor, fastened to the shaft, with a low differential speed with respect to the bowl, trains the solid particles towards a sludge space which is periodically discharged through a hydraulically driven valve. As both speed and flow rate reach high figures, an energy conservation system allows the consumed power to be limited. Programa(s) ENG-HYDROCARB 1C - Programme (EEC) of Community projects in the hydrocarbons sector, 1973-1985 Tema(s) 1.9 - PRODUCTION SYSTEMS Convocatoria de propuestas Data not available Régimen de financiación DEM - Demonstration contracts Coordinador Bertin & Cie Aportación de la UE Sin datos Dirección 59 rue Pierre Curie Zone Industrielle des Gatines 78373 Plaisir Francia Ver en el mapa Coste total Sin datos