Objective Wind energy is the fastest growing renewable energy source in Europe, accounting for 10.2% of total electricity in 2015, however there is still a need to reduce the overall cost of energy – CoE to increase its competitiveness. The capital costs represents 78% of CoE and can be broken down into several categories, with around 54% attributable to wind turbine, from which the blades represents 30%.CoE can be reduced by maximizing energy production for the site by installing larger turbines. However, as the length of current rotor blades increase, their associated cost and weight increase at a faster rate than the turbine’s power output. Furthermore, as blades get longer they are becoming increasingly more difficult to manufacture and transport setting the limit at 90m.Winfoor (WF) and Marstrom (MC) aim to pursue this market opportunity by bringing to market its innovative and ground-breaking blade technology – Triblade. Triblade is a “3-in-1” modular blade, built as a Composite Material Truss that will allow rotor blades to be longer (up to 50%), stiffer (up to 290%) and lighter (up to 78%), whilst reducing around 65.2% production costs and increasing ease of transport and installation resulting in up to 15.5% CoE reduction. These are game changing improvements that can play an important role in driving the development of next generation of larger turbines and accelerate the transition to greater use of renewables worldwide. TRIBLADE project is expected to significantly enhance WF&MC’s profitability, with expected accumulated revenue of €85M and profits of €40M, 6 years after commercialization. Moreover, the successful achievement of TRIBLADE objectives is expected to assist Europe in achieving objectives to secure a sustainable energy system based on a low-carbon electricity from wind. This project will therefore entail increased competitiveness for the SME value chain and for the EU as a whole. Fields of science engineering and technologymechanical engineeringmanufacturing engineeringengineering and technologymaterials engineeringcompositesengineering and technologyenvironmental engineeringenergy and fuelsrenewable energywind power Programme(s) H2020-EU.3.3. - SOCIETAL CHALLENGES - Secure, clean and efficient energy Main Programme H2020-EU.2.1.1. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT) H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument Topic(s) SMEInst-09-2016-2017 - Stimulating the innovation potential of SMEs for a low carbon and efficient energy system Call for proposal H2020-SMEInst-2016-2017 See other projects for this call Sub call H2020-SMEINST-2-2016-2017 Funding Scheme SME-2 - SME instrument phase 2 Coordinator WINFOOR AB Net EU contribution € 1 577 393,65 Address ALDERMANSGATAN 2 227 64 LUND Sweden See on map SME The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed. Yes Region Södra Sverige Sydsverige Skåne län Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 2 253 419,50 Participants (1) Sort alphabetically Sort by Net EU contribution Expand all Collapse all MARSTROM COMPOSITE AB Sweden Net EU contribution € 518 437,50 Address LUCERNAVAGAN 9 593 50 VASTERVIK See on map SME The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed. Yes Region Södra Sverige Småland med öarna Kalmar län Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Total cost € 740 625,00
