Objetivo
The overall objective of the REProMag project is to develop and validate an innovative, resource-efficient manufacturing route (SDS process) for Rare Earth magnets that allows for the economically efficient production of net-shape magnetic parts with complex structures and geometries, while being 100% waste-free along the whole manufacturing chain.
The new Shaping, Debinding and Sintering (SDS) process for Rare Earth magnets is an innovative automated manufacturing route to realise complex 3D- and multilayered parts; resulting in a significant increase in the material efficiency of at least 30% during manufacturing; while at the same time allowing additional geometrical features such as threads, cooling channels, small laminations/segments (e.g. to increase the efficiency of electrical motors) and structural optimisations such as lightweight-structures or the joint-free realisation. As part of the project, the possibility to produce hybrid parts such as an improved moving-coil transducer for headphones, loudspeakers and microphones will be evaluated.
The SDS process allows a new level of sustainability in production, as the energy efficiency along the whole manufacturing chain can be increased by more than 30% when compared to conventional production routes. Moreover, the used raw material is 100% recycled and can be again recycled in the same way at the end of the lifetime of the products. In short, the innovative REProMag SDS process has the potential to manufacture complex structures of high quality and productivity with minimum use of material and energy, resulting in significant economic advantages compared to conventional manufacturing.
The REProMag project is a highly innovative combination of applied research, technology development and integration, resulting in small-scale prototypes and a closely connected demonstration activity clearly showing the technical feasibility of the REProMag SDS processing route in a near to operational environment.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural.
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural.
- ingeniería y tecnologíaingeniería ambientalgestión de residuosprocesos de tratamiento de residuosreciclaje
- ingeniería y tecnologíaingeniería ambientalminería y procesamiento de minerales
- ingeniería y tecnologíaingeniería de materialesrecubrimiento y películas
- ingeniería y tecnologíaingeniería eléctrica, ingeniería electrónica, ingeniería de la informacióningeniería de la informacióntelecomunicaciónteléfono móvil
- ingeniería y tecnologíaingeniería mecánicaingeniería de fabricaciónfabricación aditiva
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Convocatoria de propuestas
Consulte otros proyectos de esta convocatoriaConvocatoria de subcontratación
H2020-FoF-2014
Régimen de financiación
RIA - Research and Innovation actionCoordinador
75228 ISPRINGEN
Alemania
Ver en el mapa
Participantes (14)
2700 Wiener Neustadt
Ver en el mapa
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.
01239 DRESDEN
Ver en el mapa
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.
8742 Obdach
Ver en el mapa
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.
1060 Wien
Ver en el mapa
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.
05100 MONTGENEVRE
Ver en el mapa
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.
80333 Munchen
Ver en el mapa
30900 Wedemark
Ver en el mapa
1040 Wien
Ver en el mapa
B15 2TT Birmingham
Ver en el mapa
8700 Leoben
Ver en el mapa
1000 Ljubljana
Ver en el mapa
TW11 0LW Middlesex
Ver en el mapa
La participación finalizó
70599 Stuttgart
Ver en el mapa
70176 Stuttgart
Ver en el mapa