An integrated pilot line for micro-fabricated medical devices

Información del proyecto

InForMed

Identificador del acuerdo de subvención: 662155

DOI

10.3030/662155

Proyecto cerrado

Fecha de la firma de la CE 10 Julio 2015

Fecha de inicio 1 Junio 2015

Fecha de finalización 30 Septiembre 2018

Financiado con arreglo a

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT)

Coste total

€ 47 773 600,41

Aportación de la UE

€ 11 249 720,51

Coordinado por

PHILIPS ELECTRONICS NEDERLAND BV
Netherlands

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (3)

Initial dissemination plan & communication plan
Public summary of project
Final report on projects results

Final report on project results

Demonstrators, pilots, prototypes (11)

Measurement equipment for Cytopatch prototypes demonstrated
Demonstration of ablation catheter using ultra-sound ablation monitoring and OSS
Prototype feasibility demonstration
Final prototype and associated datasheet
Demonstration of ready-to-use electrophysiology CMOS chip
Implementation and way of working with Product Data Management system
First prototypes of Cytopatch and MEA chip
Blue print for development & industrialization project micro modules.
Demonstration of a fully optically powered smart catheter
Demonstrate Statistical Process Control (SPC) on the defined critical process parameters.
Demonstration of in-wall extruded electrode contacts as technology for the production of highly integrated catheters.

Websites, patent fillings, videos etc. (1)

Setting up public project web site.

Other (1)

InForMed Exploitation Symposium

Report on InForMed Exploitation Symposium and launching event (DMD conference)

Publicaciones

Conference proceedings (1)

Novell method for adhesion between pi-pdms using butyl rubber for large area body patches

Autores: S.Joshi et al.
Publicado en: 2017
Editor: Eurosensor

Peer reviewed articles (4)

Chemically Stable Atomic-Layer-Deposited Al 2 O 3 Films for Processability

Autores: Mikael Broas, Olli Kanninen, Vesa Vuorinen, Markku Tilli, Mervi Paulasto-Kröckel
Publicado en: ACS Omega, Edición 2/7, 2017, Página(s) 3390-3398, ISSN 2470-1343
Editor: AS Omega
DOI: 10.1021/acsomega.7b00443

Single-Step CMOS Compatible Fabrication of High Aspect Ratio Microchannels Embedded in Silicon

Autores: Marta Kluba, Aslihan Arslan, Ronald Stoute, James Muganda, Ronald Dekker
Publicado en: Proceedings, Edición 1/4, 2017, Página(s) 291, ISSN 2504-3900
Editor: Eurosensor
DOI: 10.3390/proceedings1040291

Ultra-Stretchable Interconnects for High-Density Stretchable Electronics

Autores: Salman Shafqat, Johan Hoefnagels, Angel Savov, Shivani Joshi, Ronald Dekker, Marc Geers
Publicado en: Micromachines, Edición 8/9, 2017, Página(s) 277, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8090277

Electrifying catheters with light,” The Optical Society, Optics Express Vol. 25, Issue 8, pp. 8534-8549 (2017). The article was highlighted on the optical society SPOTLIGHT page in May 2017!

Autores: M. Pekar et al.
Publicado en: Optics express, 2017, ISSN 1094-4087
Editor: Optical Society of America

Monographic books (1)

Flex-to-Rigid (F2R), A high precision assembly platform,” A brochure explaining the open F2R platform that will be running in the pilot-line.

Autores: University of Delft and Philips Research.
Publicado en: 2017
Editor: Philips