An integrated pilot line for micro-fabricated medical devices

Informazioni relative al progetto

InForMed

ID dell’accordo di sovvenzione: 662155

DOI

10.3030/662155

Progetto chiuso

Data della firma CE 10 Luglio 2015

Data di avvio 1 Giugno 2015

Data di completamento 30 Settembre 2018

Finanziato da

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT)

Costo totale

€ 47 773 600,41

Contributo UE

€ 11 249 720,51

Coordinato da

PHILIPS ELECTRONICS NEDERLAND BV
Netherlands

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (3)

Initial dissemination plan & communication plan
Public summary of project
Final report on projects results

Final report on project results

Demonstrators, pilots, prototypes (11)

Measurement equipment for Cytopatch prototypes demonstrated
Demonstration of ablation catheter using ultra-sound ablation monitoring and OSS
Prototype feasibility demonstration
Final prototype and associated datasheet
Demonstration of ready-to-use electrophysiology CMOS chip
Implementation and way of working with Product Data Management system
First prototypes of Cytopatch and MEA chip
Blue print for development & industrialization project micro modules.
Demonstration of a fully optically powered smart catheter
Demonstrate Statistical Process Control (SPC) on the defined critical process parameters.
Demonstration of in-wall extruded electrode contacts as technology for the production of highly integrated catheters.

Websites, patent fillings, videos etc. (1)

Setting up public project web site.

Other (1)

InForMed Exploitation Symposium

Report on InForMed Exploitation Symposium and launching event (DMD conference)

Pubblicazioni

Conference proceedings (1)

Novell method for adhesion between pi-pdms using butyl rubber for large area body patches

Autori: S.Joshi et al.
Pubblicato in: 2017
Editore: Eurosensor

Peer reviewed articles (4)

Chemically Stable Atomic-Layer-Deposited Al 2 O 3 Films for Processability

Autori: Mikael Broas, Olli Kanninen, Vesa Vuorinen, Markku Tilli, Mervi Paulasto-Kröckel
Pubblicato in: ACS Omega, Numero 2/7, 2017, Pagina/e 3390-3398, ISSN 2470-1343
Editore: AS Omega
DOI: 10.1021/acsomega.7b00443

Single-Step CMOS Compatible Fabrication of High Aspect Ratio Microchannels Embedded in Silicon

Autori: Marta Kluba, Aslihan Arslan, Ronald Stoute, James Muganda, Ronald Dekker
Pubblicato in: Proceedings, Numero 1/4, 2017, Pagina/e 291, ISSN 2504-3900
Editore: Eurosensor
DOI: 10.3390/proceedings1040291

Ultra-Stretchable Interconnects for High-Density Stretchable Electronics

Autori: Salman Shafqat, Johan Hoefnagels, Angel Savov, Shivani Joshi, Ronald Dekker, Marc Geers
Pubblicato in: Micromachines, Numero 8/9, 2017, Pagina/e 277, ISSN 2072-666X
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8090277

Electrifying catheters with light,” The Optical Society, Optics Express Vol. 25, Issue 8, pp. 8534-8549 (2017). The article was highlighted on the optical society SPOTLIGHT page in May 2017!

Autori: M. Pekar et al.
Pubblicato in: Optics express, 2017, ISSN 1094-4087
Editore: Optical Society of America

Monographic books (1)

Flex-to-Rigid (F2R), A high precision assembly platform,” A brochure explaining the open F2R platform that will be running in the pilot-line.

Autori: University of Delft and Philips Research.
Pubblicato in: 2017
Editore: Philips