Recycling and Repurposing of Plastic Waste for Advanced 3D Printing Applications

Información del proyecto

Repair3D

Identificador del acuerdo de subvención: 814588

DOI

10.3030/814588

Proyecto cerrado

Fecha de la firma de la CE 12 Diciembre 2018

Fecha de inicio 1 Enero 2019

Fecha de finalización 31 Mayo 2023

Financiado con arreglo a

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials

Coste total

€ 5 998 832,50

Aportación de la UE

€ 5 998 832,50

Coordinado por

TINEXTA INNOVATION HUB S.P.A.
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Websites, patent fillings, videos etc. (5)

Project logo, leaflets and website
Report on Summer school and Training for Consumer Best Practices and Societal impact for circularity of materials use activities

The final version of deliverable will be submitted at M45 although the periodic progress of the work will be delivered through reports scheduled at M10 M19 that will be included in the periodic reports that will be submitted to the EC Therefore M1M18 periodic report will include the update scheduled at M10 The M19M36 periodic report will include the update scheduled at M19

Open-day exploitation and dissemination workshop

Openday exploitation and dissemination workshop

Communication Plan
End of project open-day exploitation and dissemination workshop

End of project openday exploitation and dissemination workshop

Documents, reports (1)

The potential of AM technologies for processing recycled materials

Publicaciones

Peer reviewed articles (9)

Integrating Exposure Assessment and Process Hazard Analysis: The Nano-Enabled 3D Printing Filament Extrusion Case

Autores: Stratos Saliakas, Spyridon Damilos, Melpo Karamitrou, Aikaterini-Flora Trompeta, Tatjana Kosanovic Milickovic, Costas Charitidis and Elias P. Koumoulos
Publicado en: Polymers, Edición 15(13), 2023, Página(s) 2836, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym15132836

A systematic study of electrolyte effect on exfoliation efficiency and green synthesis of graphene oxide

Autores: Georgios Konstantopoulos, Eleni Fotou, Afroditi Ntziouni, Konstantinos Kordatos, Costas A.Charitidis
Publicado en: Ceramics International, Edición 47 (22), 2021, Página(s) 32276-32289, ISSN 0272-8842
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ceramint.2021.08.122

Inductive Thermal Effect on Thermoplastic Nanocomposites with Magnetic Nanoparticles for Induced-Healing, Bonding and Debonding On-Demand Applications

Autores: Maria Kanidi, Niki Loura, Anna Frengkou,Tatjana Kosanovic Milickovic, Aikaterini-Flora Trompeta, Costas Charitidis
Publicado en: J. Compos. Sci., Edición 7(2), 2023, Página(s) 74, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs7020074

Leaching of Nano-Additives as a Method for Life-Cycle Suitability: A Study on 3D-Printed Nanocomposites for Wearables Applications

Autores: Iakovos Gavalas, Despoina Ntenekou, Anna Karatza, Spyridon Damilos, Stratos Saliakas, Elias P. Koumoulos
Publicado en: Processes, Edición 11(7), 2023, Página(s) 2053, ISSN 2227-9717
Editor: MDPI
DOI: 10.3390/pr11072053

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Autores: Elias P. Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A. Charitidis
Publicado en: Journal of Composites Science, Edición 3/3, 2019, Página(s) 86, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs3030086

Ready-to-Use Recycled Carbon Fibres Decorated with Magnetic Nanoparticles: Functionalization after Recycling Process Using Supercritical Fluid Chemistry

Autores: Sophie Martin , Tatjana Kosanovic Milickovic , Costas A. Charitidis and Sandy Moisan
Publicado en: Journal of Composite Science, 2023, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs7060236

Effect of crosslinker to monomer ratio on the adhesion and size distribution of silver nanoparticles grown on poly (methacrylic acid) microspheres

Autores: P. Kainourgios, P. Maroulas, C.A. Charitidis
Publicado en: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Edición 662, 2023, Página(s) 131002, ISSN 1873-4359
Editor: Elsevier
DOI: 10.1016/j.colsurfa.2023.131002

Development of CNT-Based Nanocomposites with Ohmic Heating Capability towards Self-Healing Applications in Extrusion-Based 3D Printing Technologies

Autores: Niki Loura, Eleni Gkartzou, Aikaterini-Flora Trompeta, Georgios Konstantopoulos, Panagiotis A. Klonos, Apostolos Kyritsis, Costas A. Charitidis
Publicado en: C, Edición 9(4), 2023, Página(s) 111, ISSN 2311-5629
Editor: MDPI
DOI: 10.3390/c9040111

Antibacterial Interactions of Ethanol-Dispersed Multiwalled Carbon Nanotubes with <i>Staphylococcus aureus</i> and <i>Pseudomonas aeruginosa</i>

Autores: Mihaela Asaftei, Massimiliano Lucidi, Stefan Razvan Anton, Aikaterini-Flora Trompeta, Radu Hristu, Denis E. Tranca, Efstathios Fiorentis, Cristina Cirtoaje, Veronica Lazar, George A. Stanciu, Gabriella Cincotti, Paola Ayala, Costas A. Charitidis, Alina Holban, Paolo Visca, Stefan G. Stanciu
Publicado en: ACS Omega, Edición 9, 2024, Página(s) 33751-33764, ISSN 2470-1343
Editor: ACS Publications
DOI: 10.1021/acsomega.4c03044

Conference proceedings (4)

3D printed CFRPs and micro-composite products by design from recycled resources

Autores: T. Kosanovic Milickovic, W. Van De Steene, L. Cardon, C. Charitidis
Publicado en: 2019
Editor: 9th EASN International Conference on Innovation in Aviation & Space

Composite materials circular economy: the case of 'green' fibres and nanoenhanced fibrous polymer composites

Autores: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis
Publicado en: 2019
Editor: EuroNanoForum 2019

Novel Method For Unpolymerized Prepreg Recycling Using Supercritical CO2 Extraction.

Autores: Sophie Martin, Henry-Pierre Guriec, Sandy Moisan
Publicado en: 2022
Editor: ECCM
DOI: 10.5075/epfl-298799_978-2-9701614-0-0

Chain extension of recycled polyethylene terephthalate (PET) via reactive extrusion for additive manufacturing applications

Autores: Theodoros Gikarakis, Christos Tsirogiannis, Christina Podara, Eleni Gkartzou, Aikaterini-Flora Trompeta and Costas Charitidis
Publicado en: Polymer Process Innovation Conference 2023, 2023
Editor: University of Minho

Thesis and dissertations (1)

Development of nanocomposites with self-sensing and self-healing properties for use in Additive Manufacturing technologies

Autores: Niki Loura
Publicado en: 2021
Editor: NTUA
DOI: 10.26240/heal.ntua.21796