Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

A hydrophilic polymer material

Objetivo

The Danish SME Jonsman Innovation ApS will target a major market opportunity through the market introduction of a new thermoplastic polymer (Tensistat) that creates truly hydrophilic devices right after injection moulding or extrusion. Like other thermoplastic materials, Tensistat can be used for many applications, but our R&D focus was to develop the best polymer for applications where hydrophilicity is mandatory for performance and safety (e.g. single-use medical devices such as diagnostic consumables, tubing for injectors, catheters and microfluidic devices). As devices produced with Tensistat are hydrophilic directly from the moulding machine, no post-processing, e.g. hydrophilic coatings are needed, meaning cheaper, safer and more reliable devices.
By ensuring and demonstrating a maximum level of effectiveness and complying with the regulatory requirements, we will attain a key differentiating factor in order to gain access to the market.
Initially, this will require a Phase 1 feasibility study that will give us a clear direction for our demonstration and market introduction strategies. Later, based on proven feasibility, in the Phase 2 project we will gather the necessary documentation to reach regulatory approval, so Tensistat can be used in the manufacturing of medical and microfluidics devices. Still, we will demonstrate the technical and economic benefits of Tensistat in these segments, to generate enough consumer confidence and facilitate broader market uptake. If the objectives for Phase 1 and 2 are successfully achieved, we will be favourably positioned towards a very large opportunity for Jonsman Innovation. Accordingly, we foresee a cumulative revenue of more than €29.7 million, 5 years after commercialization of the Tensistat material.

Ámbito científico (EuroSciVoc)

Programa(s)

Tema(s)

Régimen de financiación

SME-1 - SME instrument phase 1

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) H2020-EIC-SMEInst-2018-2020

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

JONSMAN INNOVATION APS
Aportación neta de la UEn
€ 50 000,00
Dirección
HOVEDVEJEN 1d
3330 GORLOSE
Dinamarca
Pyme
Sí
Región
Danmark Hovedstaden Nordsjælland
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total
€ 71 429,00