CORDIS provides links to public deliverables and publications of HORIZON projects.
Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .
Deliverables
Selection of the best yeast strains taking into account the lipid content and lipid profile produced, and the fermentation strategy(low or high acetate concentration)Related Tasks: T3.2 (T3.2.2)
Results of full-chain process simulations (opens in new window)Full-chain process model of the BioSFerA process. Determination of the desing and operational aspects of the BiosFerA process at industrial scale.Related Tasks: T6.2
BioSFerA Replication Pre-Feasibility Studies in at least 3 EU countries (opens in new window)Replication feasibility studies for different regions around Europe: in Italy (RINA-C), in Greece (CERTH), Spain-South West (CARTIF), Finland-North (VTT), Netherlands-Central Europe (SEANRG BV)Related Tasks: T7.1
Identification of optimal operating window for TAG upgrading (opens in new window)Definition of the optimal operating range regarding the reaction temperature, system pressure, H2/bio-oil ratio, and Liquid Hourly Space Velocity (LHSV)Related Tasks: T5.3
Dynamic simulation and control of the BioSFerA process (opens in new window)Dynamic simulations and plantwide control system development aiming to regulate the produced syngas composition according to the selected strains specifications and the by-products minimization.Related Tasks: T6.4
Optimization of syngas fermentation process parameters for acetate production (1st stage) (opens in new window)Experiments will be carried out in order to identify the best acetogenic bacteria in terms of productivity, yield and titer of acetate, which will be used to feed the subsequent fermentation process.Related Tasks: T3.3
Report on communication and dissemination activities 4 (opens in new window)Report on communication and dissemination activities [M12, M18, M24, M30, M36, M42]Related Tasks: T8.2
Pre-selection catalyst and set-up for 16-batch reactor (opens in new window)Purified TAGs analysis and screening on potential contaminants for hydrotreatment. Related Tasks: T5.1, T5.2
Results of the pilot run (opens in new window)Fermentation start-up at 10L scale: validate coupling of both systems using the pure gas - Fermentation run at 100L scale (reaching TRL 5)Related Tasks: T4.3
Report on communication and dissemination activities 5 (opens in new window)Report on communication and dissemination activities [M12, M18, M24, M30, M36, M42]Related Tasks: T8.2
Optimization of acetate fermentation process parameters for C14 and C16-18 TAGs production (2nd stage) (opens in new window)Validation of performance of the best metabolically engineered oleaginous yeast strains in bench scale bioreactors. Optimization of C14 and C16-C18 TAGs volumetric productivity.Related Tasks: T3.4
Report on communication and dissemination activities 1 (opens in new window)Report on communication and dissemination activities [M12, M18, M24, M30, M36, M42] Related Tasks: T8.2
Report on communication and dissemination activities 2 (opens in new window)Report on communication and dissemination activities [M12, M18, M24, M30, M36, M42]Related Tasks: T8.2
Report on selected evaluation indicators (opens in new window)The identification of a targeted set of key performance indicators that will be served for the evaluation of the proposed concept. Related Tasks: T2.2
Lab scale downstream processing for TAGs recovery and purification using conventional and novel strategies (opens in new window)Lipids separation pre-treatments potentials and pathways, by applying the technologies currently available(steam explosion, centrifugation and membrane separation) and considering different process parameters and extraction procedures.Related Tasks: T3.5
Process layout and cost engineering of the BioSFerA biorefinery plant (opens in new window)Based on the results of pilot scale tests, results from the gasification model and the validated full chain process model, the required components will be defined and design rules for component sizing will be produced.Related Tasks: T6.3
Report on DFB Gasification modelling (opens in new window)A custom-made Enery Minimization Multi-Scale Model (EMMS) for the specific operational conditions of the DFB unit will be developed.Related Tasks: T6.1
Metabolic engineering of acetogenic bacteria for efficient syngas fermentation and production of acetate (opens in new window)Selection of the best acetate producer strain based on the syngas composition, and especially in the presence of possible inhibitors.Related Tasks: T3.2 (T3.2.1)
Full process basic definition (opens in new window)Process simulations to solve heat and mass balances for the overall process acting as a benchmark for the following lab and pilot activities. Related Tasks: T2.5
Final report on communication and dissemination activities (opens in new window)A plan for the dissemination and exploitation of results and a report on societal implications will be prepared at the end of the project.Related Tasks: T8.1, T8.2, T8.3
Bench scale gasification test at TRL4 (opens in new window)The selected feedstocks are gasified in order to validate the feedstock compatibility at TRL 4. The most suitable feedstock will be selected for the following pilot runs Related Tasks: T3.1
Stakeholders requirements and market needs (opens in new window)An analysis to define the stakeholders(technology providers, feedstock suppliers, refineries, fuel traders, final end-users, etc.) requirements and specifications will be performed. Related Tasks: T2.1
Selection of 2 catalyst and preliminary processing conditions (opens in new window)Hydrotreatment of purified TAGs will be first performed in a batch autoclave using a commercial hydrotreatment catalyst to analyze the catalyst performance.The purified TAGs will be hydrotreated in the pilot plant of KPRT in 16 parallel reactors.Related Tasks: T5.1, T5.2
Report on the Social LCA and Social CBA (opens in new window)The social Life Cycle Analysis (s-LCA) is complementing the environmental LCA and LCC by adding extra dimensions of impact analysis while social cost-benefit analysis (s-CBA) is an extension of the economic CBA, adjusted to take into account the full spectrum of costs and benefits.Related Tasks: T7.4
Validation of TAG upgrading technology in industrially-relevant scale (opens in new window)The pilot plant operation will aim in the production of a total liquid product, the fractionation of which will render approximately 1 barrel of renewable jet and 1 barrel of renewable marine diesel fuel.Related Tasks: T5.4
Determination of the main input parameters for the case studies (opens in new window)Input data regarding the feedstock supply chain, as well as preliminary information gathering for the implementation of the techno-economic analysis. Related Tasks: T2.4
Analysis of selected feedstock (opens in new window)Aiming to indicate the most promising biomass feedstock as concerns the potential capacity and its price. Fuel characterization consisting of the proximate, ultimate analysis, ash composition and fusibility, for the selected types of feedstock. Related Tasks: T2.3
Scale-up of TAG production (opens in new window)The further conversion of acetate to TAGs will be scaled at BBEPP premises as the required equipment to ferment and isolate the TAGs will not be available in the mobile pilot unit. An additional quantity of acetate and impurities will be introduced and the final mixture will emulate the thermochemical properties of the liquid produced in the pilot.Related Tasks: T4.4, T4.5
Project Communication/Dissemination & Strategy Plan (PCSP) (opens in new window)A Communication/Dissemination & Strategy Plan will be developed and continuously updated if needed throughout the entire duration of the project. Related Tasks: T8.1
Report on communication and dissemination activities 3 (opens in new window)Report on communication and dissemination activities [M12, M18, M24, M30, M36, M42]Related Tasks: T8.2
BioSFerA website able to connect the different actors involved and inform them about updates, news and coming events. Related Tasks: T8.2
The first draft of the DMP will be prepared by M6 and it will be updated whenever significant changes arise and as a minimum at M18, M36 and M48. Related Tasks: T1.2
3 test runs of 500 hours are executed at VTT's site. The synthesis gas plant is operated by VTT and the mobile fermentation unit is operated by BBEPP.Related Tasks: T4.3
Publications
Author(s):
José L. García, Beatriz Galán
Published in:
Applied Microbiology International, Issue 15(1), 2021, ISSN 1365-2672
Publisher:
John Wiley & Sons, Ltd
DOI:
10.1111/1751-7915.13991
Author(s):
Nikolaos Detsios, Leda Maragoudaki, Konstantinos Atsonios, Panagiotis Grammelis, Nikolaos G. Orfanoudakis
Published in:
Biomass Conversion and Biorefinery, Issue 14, 2024, Page(s) 27537-27555, ISSN 2190-6815
Publisher:
Springer Nature
DOI:
10.1007/s13399-023-03754-4
Author(s):
Athanasios Dimitriadis, Loukia P. Chrysikou, Ioanna Kosma, Nikos Tourlakidis, Stella Bezergianni
Published in:
Energies, Issue 17, 2024, Page(s) 3854, ISSN 1996-1073
Publisher:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/en17153854
Author(s):
Nikolaos Detsios, Stella Theodoraki, Leda Maragoudaki, Konstantinos Atsonios, Panagiotis Grammelis, Nikolaos G. Orfanoudakis
Published in:
Energies, Issue 16, 2024, Page(s) 1904, ISSN 1996-1073
Publisher:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/en16041904
Author(s):
Christian Frilund, Ilkka Hiltunen, Pekka Simell
Published in:
ChemEngineering, Issue 5/2, 2021, Page(s) 23, ISSN 2305-7084
Publisher:
MDPI
DOI:
10.3390/chemengineering5020023
Author(s):
Pedro Acuña López, Stefano Rebecchi, Elodie Vlaeminck, Koen Quataert, Christian Frilund, Jaana Laatikainen-Luntama, Ilkka Hiltunen, Karel De Winter, Wim K. Soetaert
Published in:
Fermentation, Issue 10, 2025, Page(s) 285, ISSN 2311-5637
Publisher:
MDPI
DOI:
10.3390/fermentation10060285
Author(s):
Evanthia Kostidi, Dimitrios Lyridis
Published in:
Frontiers in Energy Research, Issue 12, 2024, ISSN 2296-598X
Publisher:
Frontiers Media S.A.
DOI:
10.3389/fenrg.2024.1454862
Author(s):
Dimitrios-Sotirios Kourkoumpas, Adamantia Βon, Angeliki Sagani, Konstantinos Atsonios, Panagiotis Grammelis, Sotirios Karellas, Emmanouel Kakaras
Published in:
Bioresource Technology, Issue 393, 2023, Page(s) 130115, ISSN 0960-8524
Publisher:
Elsevier BV
DOI:
10.1016/j.biortech.2023.130115
Author(s):
Nikolaos Detsios, Leda Maragoudaki, Stefano Rebecchi, Koen Quataert, Karel De Winter, Vassilis Stathopoulos, Nikolaos Orfanoudakis, Panagiotis Grammelis, Konstantinos Atsonios
Published in:
Energies, Issue 17, 2024, Page(s) 1685, ISSN 1996-1073
Publisher:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/en17071685
Author(s):
Vasiliki Gavidou, Nikolaos Detsios, Konstantinos Atsonios, Panagiotis Grammelis
Published in:
GCGW-2021-9th Global Conference on Global Warming, Issue 7.3, 2021
Publisher:
GCGW-2021
Author(s):
Nikolaos Detsios, Leda Maragoudaki, Konstantinos A Atsonios Ville Nikkanen, Raul Piñero, Jose Mª Sanz Martín, Karel De Winter, Elodie Vlaeminck, Panagiotis Grammelis, Nikolaos G. Orfanoudakis
Published in:
34th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems , ECOS 2021, Issue 155, 2021
Publisher:
ECOS 2021 Organizing Committee
Searching for OpenAIRE data...
There was an error trying to search data from OpenAIRE
No results available