Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

DESIGN OF COMPRESSOR AIR INLET PROTECTION FOR ELECTRICAL ECS

Objetivo

"This proposal responds to the call JTI-CS-2012-1-SGO-02-040, in the Clean Sky Joint Undertaking included in the frame of the European FP7. This call is made for the design of a filtration system for electrical ECS (Environmental Control System) packs.
Traditional ECS packs take the air from the engine through the bleed system. Therefore, some previous filtration is performed, since the air has gone through several stages of the engine compressor. Contrary, electrical ECS packs capture directly the air from the atmosphere via the scoop air inlet located on the belly fairing of the aircraft. Consequently, pollutants can be ingested by the scoop and therefore be introduced in the compressor of the electrical ECS if the air inlet is not properly cleaned.
Most of aircrafts are equipped with traditional bleed ECS packs. Nevertheless, Boeing has incorporated such electrical no-bleed systems on the Boeing 787. Furthermore, applicability of actual filtration technology used on aircrafts and rotorcrafts highly exposed to harsh environment has to be further investigated and analyzed. Such systems are basically barrier filtration or inertial particle separation filters.
Thus an air filtration system has to be developed during the project to accomplish the required removal of debris and pollutants at the compressor inlet. The aim of the filtration system is at the end to guarantee that the probability of loss of fresh air supply to the cabin stays in a non-relevant range, according to ECS safety.
The methodology proposed combines theoretical (computational) and experimental techniques, and the knowledge in fluid dynamics by UPVLC with the industrial experience of LBFS in this particular area. Furthermore, applicants have wide experience managing performing EU funded projects and private funded projects for the development of filtrations systems in different industrial areas."

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

SP1-JTI-CS-2012-01
Consulte otros proyectos de esta convocatoria

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinador

UNIVERSITAT POLITECNICA DE VALENCIA
Aportación de la UE
€ 197 409,00
Dirección
CAMINO DE VERA SN EDIFICIO 3A
46022 VALENCIA
España

Ver en el mapa

Región
Este Comunitat Valenciana Valencia/València
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (1)

Mi folleto 0 0