Cel EMAS proposes a technological research program enabling to develop, validate and manufacture eight actuators presenting high performance and high reliability for high speed applications under high temperature environment. Such actuators will be capable of producing 5 N.m torque under 10.000 rpm for an environmental temperature of 100 C involving low short circuit current and will be supplied by sine wave power converters. They will present high power density and low mass by conveniently exploiting high energy - high temperature Neodymium alloy permanent magnet materials in conjunction with optimized motor topologies and high speed sensor technologies.The proposed methodology involves three stages devoted to the preliminary actuator design, to the critical actuator design and to the actuator manufacturing and testing activities, respectively.Several technologies will be evaluated at a high temperature level and, then, the best of these technologies will be improved before its integration in the final prototype. The research for motor concept will involve a comparison of permanent magnet machine topologies: internal and surface permanent magnet machine topologies are going to be compared, by means of classical motor analysis and design procedures coupled with numerical magnetic field analysis and simulation software, for their ability to provide low short circuit current and produce sinusoidal flux distribution.Moreover, optical and magnetic position sensors will be compared both on their ability to provide sufficient details on motor position and speed in very low and high speed ranges and their capacity to withstand the required temperature conditions. The criteria analyzed for each candidate architecture are: the integration density level (mass volume), the simplification of interfaces between subassembly, the thermal management performances, the ability for the technologies selected to fulfill any reliability objectives. Dziedzina nauki natural sciencesmathematicspure mathematicstopologyengineering and technologyenvironmental engineeringenergy and fuelsrenewable energyhydroelectricitymarine energywave powerengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsnatural sciencescomputer and information sciencessoftwaresoftware applicationssimulation software Program(-y) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Temat(-y) JTI-CS-2009-1-SGO-02-010 - Engine Thrust Reverser Actuation System (ETRAS) electric motor & resolver Zaproszenie do składania wniosków SP1-JTI-CS-2009-01 Zobacz inne projekty w ramach tego zaproszenia System finansowania JTI-CS - Joint Technology Initiatives - Clean Sky Koordynator ANOTATO EKPAIDEYTIKO IDRIMA PEIRAIA TECHNOLOGIKOY TOMEA Wkład UE € 138 900,00 Adres PETROU RALLI & THIVON 250 12244 EGALEO Grecja Zobacz na mapie Rodzaj działalności Higher or Secondary Education Establishments Kontakt administracyjny Pavlos Kouros (Prof.) Linki Kontakt z organizacją Opens in new window Strona internetowa Opens in new window Koszt całkowity Brak danych
