Cel New innovative processing methods have been developed for thermoplastic matrix composites using the filament winding technique. This technique has already proved to be cost effective for thermoset matrix composites and combined with the easier processing of the thermoplastics, manufacture of cost effective high performance products can be achieved for a range of applications. Apart from the development of material processing techniques, the aim is to develop specific processing equipment with associated sensor and control systems. The choice of materials spans thermoplastics reinforced with carbon fibres to glass fibres.Standard test methods and quality accept levels have been agreed upon. The processing parameters for different heating methods have been optimised. Good quality samples have been produced, including flat sections and nongeodesic winding. A flexible process control system has been developed and tested.THE OBJECTIVES OF THE PROGRAMME ARE TO DEVELOP NEW INNOVATIVE PROCESSING METHODS FOR THERMOPLASTIC MATRIX COMPOSITES USING THE FILAMENT WINDING TECHNIQUE. THIS TECHNIQUE HAS ALREADY PROVED TO BE COST EFFECTIVE FOR THERMOSET MATRIX COMPOSITES AND COMBINED WITH THE EASIER PROCESSING OF THE THERMOPLASTICS, MANUFACTURE OF COST EFFECTIVE HIGH PERFORMANCE PRODUCTS CAN BE ACHIEVED FOR A RANGE OF APPLICATIONS.APART FROM THE DEVELOPMENT OF MATERIAL PROCESSING TECHNIQUES, IT IS THE GOAL TO DEVELOP SPECIFIC EQUIPMENT WITH ASSOCIATED SENSOR AND CONTROL SYSTEMS. THE CHOICE OF MATERIALS SPAN FROM THERMOPLASTICS REINFORCED WITH CARBON FIBERS TO GLASS FIBERS. Dziedzina nauki engineering and technologymaterials engineeringfibersengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemsengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsengineering and technologymaterials engineeringcompositescarbon fibers Program(-y) FP1-BRITE - Multiannual research and development programme (EEC) in the fields of basic technological research and the applications of new technologies (BRITE), 1985-1988 Temat(-y) Data not available Zaproszenie do składania wniosków Data not available System finansowania CSC - Cost-sharing contracts Koordynator Per Udsen Co. Aircraft Industry A/S Wkład UE Brak danych Adres 8500 Grenå Dania Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (3) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko AACHEN UNIVERSITY OF TECHNOLOGY Niemcy Wkład UE Brak danych Adres Templergraben 55 52056 AACHEN Zobacz na mapie Koszt całkowity Brak danych Dornier Luftfahrt GmbH Niemcy Wkład UE Brak danych Adres An der Bundesstraße 31 88039 Friedrichshafen Zobacz na mapie Koszt całkowity Brak danych IMPERIAL CHEMICAL INDUSTRIES PLC Zjednoczone Królestwo Wkład UE Brak danych Adres Millbank Imperial Chemical House SW1P 3JF LONDON Zobacz na mapie Koszt całkowity Brak danych