Photovoltaic with superior crack resistance

Informacje na temat projektu

PHYSIC

Identyfikator umowy o grant: 737447

DOI

10.3030/737447

Projekt został zamknięty

Data podpisania przez KE 18 Listopada 2016

Data rozpoczęcia 1 Stycznia 2017

Data zakończenia 30 Czerwca 2018

Finansowanie w ramach

• EXCELLENT SCIENCE - European Research Council (ERC)

Koszt całkowity

€ 149 500,00

Wkład UE

€ 149 500,00

Koordynowany przez

SCUOLA IMT (ISTITUZIONI, MERCATI, TECNOLOGIE) ALTI STUDI DI LUCCA
Italy

Periodic Reporting for period 1 - PHYSIC (Photovoltaic with superior crack resistance)

Okres sprawozdawczy: 2017-01-01 do 2018-06-30

Podsumowanie kontekstu i ogólnych celów projektu

Cracks in silicon solar cells composing photovoltaic (PV) modules are originated from production, transportation, installation, and exposure of the modules to the environment. The economic impact of cracking in PV modules can been assessed in about 6 Euro/(kWp year) due to the cost of repair/substitution and the missing electric production while cracks are not yet observable. This has a clear huge technological and economic impact on the market, and it can be estimated in about 180 MEuro/year of losses, by considering a conservative amount of 30 GWp of new installations in the World per year. If cracking cannot be avoided due to the intrinsic brittleness of silicon, the present ERC Proof of Concept has proposed a new technological method to limit the effect of cracking as much as possible, and it has proved its feasibility by realising prototypes at the laboratory scale. Specifically, a pre-stressing technique has been proposed to increase residual compressive stresses in silicon and induce crack face contact and electric recovery, consistently with the key findings obtained within the ERC StG CA2PVM project. As a result, a patent application has been made on the innovative PV laminator for the application of pre-stressing and on the innovative design of the PV modules that can be produced with this technology.