Large Additive Subtractive Integrated Modular Machine

Numerical study of rolling process on the plastic strain distribution in wire + arc additive manufactured Ti-6Al-4V

Autorzy: M. Abbaszadeh, J. Hönnige, F. Martina, N. Kashaev, S. W. Williams, B. Klusemann
Opublikowane w: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019, Strona(/y) 150019
Wydawca: AIP Publishing
DOI: 10.1063/1.5112695

Fundamental study on additive manufacturing of aluminum alloys by friction surfacing layer deposition

Autorzy: Junjun Shen, Stefanie Hanke, Arne Roos, Jorge F. dos Santos, Benjamin Klusemann
Opublikowane w: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019, Strona(/y) 150015
Wydawca: AIP Publishing
DOI: 10.1063/1.5112691

Mapping of non-destructive techniques for inspection of wire and arc additive manufacturing

Autorzy: Lopez, A., Bacelar, R., Pires, I., Santos, T., & Quintino, L
Opublikowane w: In Proceedings of the 7th International Conference on Mechanics and Materials in Design (M2d2017) (Vol. 1844), 2017, Strona(/y) PAPER REF: 6654
Wydawca: INEGI/FEUP

Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures

Autorzy: M. Abbaszadeh, J. R. Hönnige, F. Martina, L. Neto, N. Kashaev, P. Colegrove, S. Williams, B. Klusemann
Opublikowane w: Journal of Materials Engineering and Performance, Numer 28/8, 2019, Strona(/y) 4931-4942, ISSN 1059-9495
Wydawca: ASM International
DOI: 10.1007/s11665-019-04249-y

Phased Array Ultrasonic Inspection of Metal Additive Manufacturing Parts

Autorzy: Ana Beatriz Lopez, João Santos, José Pedro Sousa, Telmo G. Santos, Luísa Quintino
Opublikowane w: Journal of Nondestructive Evaluation, Numer 38/3, 2019, ISSN 0195-9298
Wydawca: Kluwer Academic/Plenum Publishers
DOI: 10.1007/s10921-019-0600-y

Non-destructive testing for wire + arc additive manufacturing of aluminium parts

Autorzy: João B. Bento, Ana Lopez, Inês Pires, Luísa Quintino, Telmo G. Santos
Opublikowane w: Additive Manufacturing, Numer 29, 2019, Strona(/y) 100782, ISSN 2214-8604
Wydawca: Elsevier BV
DOI: 10.1016/j.addma.2019.100782

Wire plus arc additive manufactured functional steel surfaces enhanced by rolling

Autorzy: Philip Dirisu, Ganguly Supriyo, Filomeno Martina, Xiangfang Xu, Stewart Williams
Opublikowane w: International Journal of Fatigue, Numer 130, 2020, Strona(/y) 105237, ISSN 0142-1123
Wydawca: Elsevier BV
DOI: 10.1016/j.ijfatigue.2019.105237

Analysis of fracture toughness properties of wire + arc additive manufactured high strength low alloy structural steel components

Autorzy: Philip Dirisu, Supriyo Ganguly, Ali Mehmanparast, Filomeno Martina, Stewart Williams
Opublikowane w: Materials Science and Engineering: A, Numer 765, 2019, Strona(/y) 138285, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2019.138285

Formability of a wire arc deposited aluminium alloy

Autorzy: C. M. A. Silva, I. M. F. Bragança, A. Cabrita, L. Quintino, P. A. F. Martins
Opublikowane w: Journal of the Brazilian Society of Mechanical Sciences and Engineering, Numer 39/10, 2017, Strona(/y) 4059-4068, ISSN 1678-5878
Wydawca: Brazilian Society of Mechanical Sciences and Engineering
DOI: 10.1007/s40430-017-0864-z

Mechanical Properties Enhancement of Additive Manufactured Ti-6Al-4V by Machine Hammer Peening

Autorzy: Leonor Neto, Stewart Williams, Jialuo Ding, Jan Hönnige, Filomeno Martina
Opublikowane w: Advanced Surface Enhancement - Proceedings of the 1st International Conference on Advanced Surface Enhancement (INCASE 2019)—Research Towards Industrialisation, 2020, Strona(/y) 121-132, ISBN 978-981-15-0053-4
Wydawca: Springer Singapore
DOI: 10.1007/978-981-15-0054-1_13

Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing

Autorzy: Ana Lopez, Ricardo Bacelar, Inês Pires, Telmo G. Santos, José Pedro Sousa, Luísa Quintino
Opublikowane w: Additive Manufacturing, Numer 21, 2018, Strona(/y) 298-306, ISSN 2214-8604
Wydawca: Elsevier BV
DOI: 10.1016/j.addma.2018.03.020

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz